Midi Sysex Messages; Permanent Patches - Lexicon MPX 110 Manual

MPX 110

MIDI SYSEX MESSAGES

MIDI Sysex messages can be used to access all algorithm
parameters. More information about using this advanced
feature with the MPX 110 and other Lexicon products is
available at www.lexicon.com. The website offers
instructions, sample messages, and a complete table of
parameter Sysex addresses.
Note:
Executing MIDI Sysex messages is a complicated
process. Please observe the cautionary notes
included on the website.

PERMANENT PATCHES

The MPX 110 recognizes permanent, non-learnable
MIDI patches to provide additional MIDI control.
Permanent patches connect designated Continuous
Controllers to specific audio parameters that are not
accessible on the front panel. Permanent Patches for
each algorithm are shown on pages 5-10 and 5-11.
The unit recognizes Permanent Patches on the current
Program Load Channel only. To use a permanently
patched controller for a Learned Patch, make the unit
learn that patch on a different channel. If a controller is
used for both a Permanent and Learned Patch on the
same channel, the result will be unpredictable.
Some patched parameters are also controlled with the
Adjust knob. In these cases, either control will function
and will override adjustments made by the other.
Note:
Permanent Patches will be disabled when the System
Mode parameter MIDI Patching is set to Disabled.
MIDI Operation
5-9