Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sea-doo 1997 XP
Summarization of Contents
Foreword and Safety Warnings
Warning and Caution Symbols
Defines symbols used in the guide to highlight important safety information.
General Safety Guidelines
Essential safety rules for operating the watercraft to prevent injury or death.
Distributor and Warranty Information
List of Distributors
Lists distributors and service centers for North American regions.
1997 Bombardier Watercraft Limited Warranty
Details warranty coverage, exclusions, and consumer assistance procedures.
Watercraft Identification and Labels
Registration Number Location
Illustrates where the registration number is located on various models.
Important Labels Location
Diagrams showing the placement of labels on different model series.
Hull and Engine Identification Numbers
Explains the location of the Hull and Engine Identification Numbers.
Component Functions and Operation
Handlebar and Primary Controls
Describes the handlebar, throttle lever, and engine start/stop button functions.
Safety Lanyard and Security System
Explains the safety lanyard switch and Digitally Encoded Security System.
Key Operational Systems
Details operation of fuel, oil, trim, and other key systems.
Instrumentation and Gauges
Explains various gauges like speedometer, tachometer, and info center.
Fueling and Lubrication Procedures
Safe Fueling Practices
Provides essential instructions and warnings for safe refueling.
Recommended Lubricants
Specifies the correct type of oil for the oil injection system.
Break-in Period and Inspections
Engine Break-in Guidelines
Details the recommended engine break-in period and operational guidelines.
10-Hour Dealer Inspection
Advises on a mandatory dealer inspection after the initial 10 operating hours.
Pre-Operation Checks
Hull and Jet Pump Intake Inspection
Inspect the hull for damage and clean the jet pump water intake.
Fluid Levels and Battery Check
Verify battery connections and check fuel/oil reservoir levels.
Control Systems Verification
Ensure steering, throttle, reverse, VTS, and safety systems are operational.
Operating Instructions
Starting the Engine Safely
Provides step-by-step instructions for safely starting the watercraft engine.
Boarding Procedures
Details safe methods for boarding from docks, shallow, or deep water.
Stopping, Docking, and Beaching
Instructions for safely stopping, docking, and beaching the watercraft.
Post-Operation Care and Flushing
General Care and Storage Preparation
Outlines basic rinsing, drying, and seat adjustment for maintenance.
Cooling System Flushing
Explains how to flush the cooling system to prevent salt and debris damage.
Special Procedures and Troubleshooting
Engine Overheating
Steps to take if the engine monitoring beeper indicates overheating.
Capsized and Submerged Watercraft
Procedures for righting a capsized or handling a submerged watercraft.
Towing in Water
Safety precautions and speed limits for towing a watercraft in water.
Maintenance and Inspection
Lubrication Schedule
Details lubrication points and frequency for maintaining moving parts.
Periodic Inspection Chart
A chart outlining required inspections and their frequencies.
Carburetor Adjustment Importance
Explains the importance and procedure for carburetor adjustment.
Preparation for Use and Storage
Transportation Safety Guidelines
Guidelines for securely tying down the watercraft on a trailer.
Storage Procedures
Recommendations for preparing the watercraft for storage.
Pre-Season Preparation Checklist
A chart detailing necessary checks and services before the operating season.
Troubleshooting Common Issues
Monitoring Beeper Codes
Guide to understanding coded signals from the monitoring beeper.
Engine Starting Problems
Troubleshooting steps for common engine starting problems.
Engine Performance Issues
Diagnosing and resolving issues like misfires, overheating, and power loss.
Speed and Noise Problems
Diagnosing issues affecting top speed and propulsion system noise.
Model Specifications
SP and SPX Model Specifications
Lists engine, electrical, and dimensional specs for SP and SPX models.
HX Model Specifications
Provides technical specifications for the HX model, including engine and capacities.
GTI and GTX Model Specifications
Details specifications for GTI and GTX models, covering propulsion, dimensions, and capacities.
SI Metric Information
Unit Conversion Factors
Provides conversion factors for various SI metric and imperial units.
Other Available Publications
Related Manuals and Booklets
Lists available documentation such as Shop Manual and Specification Booklet.
Change of Address Notification
Address Update Form
Form for notifying Bombardier of changes to the owner's address.
Need help?
Do you have a question about the 1997 XP and is the answer not in the manual?
Questions and answers