Table of Contents
Advertisement
where
ip_address is the IP address you want to assign to the print server.
network_address is the NetportExpress print server Network Address
printed on the test page or on the label on the bottom of the print server
device. Enter this address in two-digit pairs separated by colons, for
example: 00:90:27:1E:5D:B8.
3
Set the NetportExpress print server IP address by typing
ping ip_address
where ip_address is the IP address used in the ARP command above.
Configuring a workstation to print
The Proinstall utility on the NetportExpress Print Server CD configures UNIX
systems to print with LPR or the Intel Proprint utility. To set up systems
manually, see UNIX manual setup in the Online Guide index.
Install and run the software
1
Log in to a UNIX workstation as root.
2
Make sure the CD mounting directory exists. To check, type
ls -l /cdrom/npcdrom
If necessary, create the directory by typing
mkdir -p /cdrom/npcdrom
3
Insert the CD into the drive. If the CD does not automatically mount, follow
these instructions:
System
Mount Instructions
HP-UX*
mount -t cdfs -o ro /dev/dsk/cqd1s0 /cdrom/npcdrom
Linux
mount -t iso9660 -r /dev/hdb /cdrom/npcdrom
SCO*
mount -f ISO9660 -o ro,lower /dev/cd0 /cdrom/pcdrom
Solaris* 2.x
mount -F hsfs -r /dev/dsk/c0t6d0s2 /cdrom/npcdrom
Sun*OS 4.1.3
mount -t hsfs -0 ro /dev/sr0 /cdrom/npcdrom
UnixWare*
mount -F cdfs -r /dev/cdrom/c0b0t210 /cdrom/npcdrom
AIX
mount -v cdrfs -o ro /dev/cd0 /cdrom/npcdrom
Note: You may have to substitute the appropriate device file name of your system's
CD-ROM drive for the italicized items in this table.
4
Type
cd /cdrom/npcdrom/unix
The final UNIX directory may be in uppercase.
15
Hide quick links:
Advertisement
Table of Contents
