Setting Up Shared Printing - Intel PCLA4251B - Netportexpress Pro Enet EXT 10BT Single Port Setup Manual

Setting up shared printing

To set up shared printing with a Windows 2000 or Windows NT 4.0 server, set
up the server to print, share the printer, and set up each PC to print to the shared
printer.
Set up Windows 2000 or Windows NT server to print
1 Insert the NetportExpress Print Server CD in the selected Windows PC. If
the setup program doesn't automatically start, run setup.exe from the CD.
2 Click Add Printer. Follow the directions in the wizard.
Note: You can also set up the server to print using LPR printing. Before sharing a
printer, see Setting up LPR printing on page 9.
Share a printer from Windows 2000 or Windows NT server
1 From the Printers folder, right-click on the new printer and then click
Properties.
2 Click the Sharing tab.
3 Select Shared and specify a share name.
Set up a PC to use the shared printer
1 From Network Neighborhood, browse to the file server sharing the printer,
and double-click the share name defined above.
2 Complete the Windows Add Printer Wizard.
8