D-Link ANT24-1800 User Manual page 23

Dual-Band Omni-Directional Antenna
Electrical specification
for 2.4 / 5.2 / 5.4 GHz
Frequency Range
Gain
ANT70-0800
VSWR
HPBW / horizontal
Electrical Specification
HPBW / vertical
Polarization
Frequency range 2400 MHz - 2500 MHz 4900 MHz - 5470 MHz
Power handling
Gain 8 dBi
Impedance
Connector
VSWR 2.0 : 1 Max.
Environmental & Mechanical Characteristics
HPBW / horizontal 360°
HPBW / vertical Survival wind speed 15°
Temperature
Polarization Linear, vertical
Humidity
Power handling 5 W (cw)
Radome color
Radome material
Impedance 50 Ohms
Weight
Omni-Directional Antenna for 802.11b/g
Connector N Jack
Dimensions
Mounting Configurations for pole/ wall
1
Environmental & Mechanical Characteristics
2
3
Survival wind speed 216 km/hr
Temperature
Humidity
Pole(max =50mm)
φ
Radome color
1 Antenna body
1.Antenna body
Radome material
2 M5-0.8 nut
3 M5 Washer
2.M5-0.8 nut
4 M5 U-Type Screw
Weight 5 Screw
3.M5 Washer
6 Anchor
4.M5 U-Type Screw
Dimensions
5.Screw
6.Anchor
1
Package Contents
5
-D-Link ANT70-0800 Antenna
6
-Extension Cable(50cm)
-Surge Protector
-Mounting Kit
-Water-proof tape
Wall
-Quick Installation Guide
2400 MHz - 2500 MHz 4900 MHz - 5470
MHz
8 dBi 8 dBi
2.0 : 1 Max.
360°
15°
Linear, vertical
5 W (cw)
50 Ohms
Omni-Directional Antenna for 802.11b/g
N Jack
Mounting Configurations for pole/ wall
216 km/hr
1
- 40°C to +70°C
95% @ 55°C
2
3
Gray
ABS, UV resistant
350 g
80x78x870 mm
Pole(max =50mm)
φ
1 Antenna body
2 M5-0.8 nut
3 M5 Washer
4 M5 U-Type Screw
5 Screw
6 Anchor
4
1
- 40°C to +70°C
Picture (1)
95% @ 25°C
When you install the antenna,
please try to find an open space like
the picture (1) , avoid to install like
White
5
the picture (2) cause the omni-directional
signals might be blocked and performance
6
be affected.
ABS, UV resistant
348 g
ø22 x 90 mm
Wall
Picture (2)
Picture (3)
Please always install the antenna
vertically to the horizontal surface, not
recommended to mount it perpendicular
to the wall.
8 dBi
4
Picture (1)
When you install the antenna,
please try to find an open space like
the picture (1) , avoid to install like
the picture (2) cause the omni-directional
signals might be blocked and performance
be affected.
Picture (2)
2.4 GHz:
Picture (3)
Please always install the antenna
vertically to the horizontal surface, not
recommended to mount it perpendicular
to the wall.
2.4 GHz:
System Requirements
ANT70-Series
5 GHz:
5 GHz:
23