NETGEAR RNDU4000 Hardware Manual page 15


To access the boot menu:
1. Power off your unit.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power on the unit.
4. Continue to press the Reset button until the Power button LED, USB and backup status
LED, disk 1 LED, and disk 2 LED illuminate.
5. Press the Backup button to scroll through boot mode options.
The unit shows the boot mode options using the LEDs, as described in the following
table:
Boot Mode
Normal
Factory default
OS reinstall
Tech support
Skip volume check
Memory test
Disk test
Legend:

• On:
• Off:

6. Press and release the Reset button to confirm your boot menu selection.
The system boots in the selected boot mode.
ReadyNAS Desktop Storage Systems
Status Indicator
Description
Power LED illuminates.
Disk 1 LED illuminates.
Disk 2 LED illuminates.
USB and backup status LED illuminates.
Power LED and disk 1 LED illuminate.
Power LED and disk 2 LED illuminate.
Power LED and USB and backup status
LED illuminate.
15
Power Disk 1 Disk 2
LED LED LED
  
  
  
  
  
  
  
USB &
Backup
LED






