Related Manuals for Hifonics ATLAS 6K
Summarization of Contents
General Installation Procedure
System Design
Discusses system design factors for car stereo installation and amplifier setup.
Installation
Provides guidance on mounting amplifiers and routing cables for optimal performance and noise reduction.
Power and Ground Connections
Details the proper gauge wire selection and connection procedures for power and ground.
Safe Connection Sequence
Outlines the recommended order for connecting various cables for safe system setup.
Power Up the System
Describes the step-by-step procedure for safely powering up the audio system for the first time.
Amplifier Feature Descriptions
MT Olympus Amplifiers Overview
Describes the unique series of amplifiers regarding channel stability, design, and input sensitivities.
Features for Boltar/Colossus Pro / Jupiter
Details the X-OVER, Low Pass X-OVER, Subsonic Filter, and Parametric EQ features for specific models.
Features for Jupiter Only
Explains the internal routing modes for RCA signals on the Jupiter amplifier.
Features for Colossus/Hercules/Atlas
Outlines features like Line Input, Full Range Output, Input Level, Phase, Parametric EQ, and Subsonic Filter.
Boltar / Colossus Pro 2-Channel Amplifier Applications
Full Range Stereo Application
Covers the basic full range stereo application for 2-channel BOLTAR and COLOSSUS PRO amplifiers.
Mono Bridging Application
Illustrates the basic mono bridging method for Hifonics amplifiers.
Jupiter 4-Channel Amplifier Applications
4 Channel Full Range System
Shows how to use 4-channel amplifiers as discrete 4-channel full range units.
2 or 3 Channel System
Demonstrates creating 2 or 3 channel systems using mono bridging of channel pairs.
Multi-Amplifier Applications
Front/Rear High Pass with Mono Sub Bass
Details combining amplifiers for front/rear high pass and mono sub bass applications.
Hercules / Atlas Mono Amplifier Applications
Basic Single Amp Application
Provides single amp installation procedures for Hercules/Atlas mono amplifiers.
Dual Amp Installation Procedure
Explains how to link two Hercules/Atlas amps for single or dual subwoofer applications.
Colossus Dual Mono Amplifier Applications
Basic Application
Outlines the basic application for Colossus Dual Mono Block amplifiers.
Using Channels L & R Independently
Details using channels independently for separate subwoofer operation.
Using Channels L & R Bridged
Explains how to use channels L & R bridged for mono subwoofer applications.
Setting Up Systems After Installation for Best Performance
Boltar/Colossus Pro / Jupiter Setup
Provides specific setup guidance for BOLTAR, COLOSSUS PRO, and JUPITER amplifiers.
Hercules/Atlas/Colossus Setup
Offers setup advice for HERCULES, ATLAS, and COLOSSUS amplifiers including Phase and Subsonic controls.
Troubleshooting a System
Hifonics Amplifier Diagnostic System
Explains the amplifier's diagnostic system and how it indicates faults like short circuits or DC offset.
Heatsink Overheating
Addresses amplifier shutdown due to heatsink overheating and its causes.
Low Output Power Issues
Guides on checking level controls, voltage, and connections for low output power issues.
Fuse Blowing Causes
Discusses reasons for fuses blowing, such as low impedance or short circuits.
System Not Turning On
Provides steps to diagnose why the system might not turn on, checking voltages and remote connections.
Noise Problems and Solutions
Covers common noise issues like hiss and electrical interference, and how to isolate their sources.
Amplifier Features Summary
Output Power Ratings
Details RMS/Dynamic output power ratings for various impedances across different amplifier models.
Crossover Operation Details
Describes the crossover settings (HP, FULL, LP-BP) and frequency ranges for amplifier channels.
Parametric EQ Specifications
Lists the frequency, bandwidth, and boost adjustments available for the parametric equalizer.
Remote Control Module (HFR-G1)
Indicates the availability and functionality of the HFR-G1 remote control module.
Other Specifications
Lists terminal types, fuse sizes, and physical dimensions for each amplifier model.
Need help?
Do you have a question about the ATLAS 6K and is the answer not in the manual?
Questions and answers