Windows® 2000 Pcs; Windows® Me Pcs - Asus AAM6000EV User Manual

3.2.3 Windows® 2000 PCs:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Local Area Connection
icon, and then select Properties.
The Local Area Connection Properties dialog box displays with a list of currently installed
network components. If the list includes Internet Protocol (TCP/IP), the protocol has already
been enabled, please skip to step 10 directly.
4. If Internet Protocol (TCP/IP) does not display as an installed component, click
5. In the Select Network Component Type dialog box, select Protocol, and then click
.
6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click
You may be prompted to install files from your Windows 2000 installation CD or other media.
Follow the instructions to install the files.
7. If prompted, click
8. After restarting your PC, double-click the Network and Dial-up Connections icon in the
Control Panel.
9. In Network and Dial-up Connections window, right-click the Local Area Connection icon,
and then select Properties.
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP),
and then click
11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Use
the following IP address and type 192.168.1.x and 255.255.255.0 in the IP address field
and Subnet Mask field, respectively.
12. Click
3.2.4 Windows® Me PCs
1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Network icon, and then
select Properties.
The Network Properties dialog box displays with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), the protocol has already been
enabled, please skip to step 11 directly.
4. If Internet Protocol (TCP/IP) does not display as an installed component, click
5. In the Select Network Component Type dialog box, select Protocol, and then click
.
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click
16
.
to restart your computer with the new settings.
.
twice to confirm and save your changes, and then close the Control Panel.
AAM6010EV-M ADSL Combo Router User's Manual
.
.
.