Effective Date - HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS Server Release Notes

Issue: Smart Array Cache error is displayed during the system recovery process
If the Battery Back Write Cache is not attached to your smart array controller properly, during system recovery,
the following error is displayed: An error occured while restoring the factory image .setSmart Array Cache
Error: "cache ratio=0/100" is not a valid option for p212 in slot 5. There are no options currently available.
Workaround: Attach a valid Battery Back Write Cache to your smart array controller.
Issue: Data volumes are not remounted after system recovery
Mounted data volumes are not remounted after performing a system recovery. These data volumes are not
damaged or destroyed but they are not visible after a system recovery operation.
Workaround: In order to restore the mount points to their original locations, you must record them prior to
running system recovery.
1. Using Windows Disk Manager, record the mount points of the volumes within the root directory of each
volume.
2. After running system recovery, scan the system to find data volumes that are not assigned drive letters.
3. Temporarily mount the volumes that are not assigned drive letters.
4. Locate the recorded list of mount points and remount the temporarily mounted volumes to the correct loc-
ations according to the record.
Issue: A VDS Dynamic Provider error is displayed and Event ID 10 is logged during system recovery
During the system recovery process, the error message HP StorageWorks MSA VDS Hardware Provider has
stopped working may be displayed and Event ID 10 may be logged in Event Viewer.
Workaround: This error can be ignored and is a known issue as described in Microsoft support KB article #
948275 (http://support.microsoft.com/kb/948275).

Effective date

November 2009
HP StorageWorks X1000 and X3000 Network Storage System 9