Table of Contents
Advertisement
4.2.3
Deleting archives and backups
The Backups deletion window displays the same tab as for the vaults view, but with check boxes for
each archive and backup. The archive or backup you have chosen to delete has the check mark.
Review the archive or backup that you have selected to delete. If you need to delete other archives
and backups select the respective check boxes, then click Delete selected and confirm the deletion.
The filters in this window are from the archives list of the vault view. Thus, if some filters have been
applied to the archives list, only the archives and backups corresponding to these filters are displayed
here. To see all content, clean all the filter fields.
4.2.4
Filtering and sorting archives
The following is a guideline for you to filter and sort archives in the archives table.
To
Sort backup archives by any
column
Filter archives by name,
owner, or machine.
Configuring the archives table
By default, the table has seven columns that are displayed, others are hidden. If required, you can
hide the displayed columns and show hidden ones.
To show or hide columns
1. Right-click any column header to open the context menu. The menu items that are ticked off
correspond to the column headers presented in the table.
2. Click the items you want to be displayed/hidden.
5 Direct management
This section covers operations that can be performed directly on a managed machine by using the
direct console-agent connection.
5.1 Administering a managed machine
This section describes the views that are available through the navigation tree of the console
connected to a managed machine, and explains how to work with each view.
Click
Delete all.
The program duplicates your selection in the Backups deletion window that has
check boxes for each archive and each backup. Review the selection and correct if
need be, then confirm the deletion.
Do
Click the column's header to sort the archives in ascending order.
Click it once again to sort the archives in descending order.
In the field below the corresponding column's header, type the archive name
(the owner name, or the machine name).
As a result, you will see the list of the archives, whose names (owner names, or
machine names) fully or just partly coincide with the entered value.
Advertisement
Table of Contents
