Table of Contents
Advertisement
Main Menu
(continued)
AUDIO
Use the following submenus to set headphone output and audio level meters.
Sub menu
Settings
INPUT
AUTO
SELECT
ANALOG
EMBEDDED
CH1 - CH8
SELECT L
(Factory
default: CH1)
EMBEDDED
CH1 - CH8
SELECT R
(Factory
default: CH2)
LEVEL
OFF
*1
ON
METER
CH SELECT
8CH
4CH
2CH
0dB POINT
OFF
ON
CH INFO.
OFF
ON
*1 When ANALOG is selected in the "INPUT SELECT" menu, the LEVEL METER does not indicate the audio level
meter even when set to ON.
38
Description
Selects input line for audio output to headphone terminal.
<AUTO>
When an SDI input line is selected with the [INPUT] button on
the front panel:
embedded audio (SDI terminal)
When input lines other than SDI1 or SDI2 are selected with
the [INPUT] button on the front panel:
analog (AUDIO input terminal)
<ANALOG> Analog (AUDIO input terminal)
Selects embedded audio channel output to the left (L) speaker.
Selects embedded audio channel output to the right (R) speaker.
Selects/turns off the audio level meter displayed by OSD.
Selects the number of audio level meter channels.
Selects and turns off 0 dB line on/off displayed on the audio level meter.
Selects and turns off displays on the audio level meter.
Underlined values indicate factory defaults.
Advertisement
Table of Contents
