Related Manuals for Gallien-Krueger Backline 110
Summarization of Contents
Introduction
Congratulations
Warm welcome and expression of customer satisfaction regarding the purchase of a Gallien-Krueger Backline Series product.
GK Philosophy
Founder Robert Gallien shares his personal philosophy on product design, innovation, and the pursuit of unique sound.
Safety Information
Verify Line Voltage and Amperage
Ensures the amplifier is connected to the correct voltage and amperage circuit to prevent hazards and damage.
Verify AC Circuit Capacity
Recommends connecting to circuits with sufficient amperage to avoid performance issues and safety hazards.
Extension Cord Usage
Advises using only the supplied power cord and avoiding extension cords to prevent safety hazards.
Power Cord Handling
Instructs users to pull the plug, not the cord, when disconnecting power and to disconnect during long periods of non-use.
Mains Disconnect
Identifies the plug/power cord as the mains disconnect device, which must remain readily operable.
Amplifier Enclosure Warnings
Warns against opening the enclosure due to shock hazard and voiding warranty; advises immediate disconnection if foreign objects enter.
Unpacking
Suggests saving original packing materials for future shipping or transport needs.
Quick Start
Backline Series Features Overview
Highlights key features like high-current power supply, active equalization, adjustable voicing filter, and balanced direct output.
Sound Tips
The Equalizer
Guidance on using the equalizer for fine-tuning sound with active circuits and suggestions for sound variety.
Contour
Explains the contour control's function in scooping mids and boosting highs/lows, and its use for specific voicings.
Overdrive
Details on using the overdrive channel to achieve various distortion and sustain sounds.
Boost/Master
Information on the Boost control for adding 'growl' and setting the Master volume for optimal tone and power.
Direct Out
Explains the balanced direct output for PA/recording, including Pre/Post EQ and Ground Lift switch functionality.
Installation & Maintenance
Installation Guidelines
Instructions for proper placement, ventilation, and rack mounting to ensure safety and optimal operation.
Positioning
Specifies that combo units should be used as floor standing units and are not for stacking or table-top placement.
Moving the Unit
Advises disconnecting all cords before moving the amplifier unit.
Cleaning Instructions
Recommends using a dry cloth only and avoiding volatile or abrasive cleaning agents.
Maintenance Recommendations
States that cleaning is the only maintenance required; suggests a road case for frequent transport.
Backline Combos
Speaker Configurations
Details the speaker sizes for Backline 115, 112, and 110 models.
Maximum Recommended Load
Specifies the recommended maximum load when the internal speaker is disconnected.
Rock Back Feature
Describes the design allowing upright or rock back positioning for flexibility and improved clarity.
Tech Talk
Current Output & Bass Response
Explains the importance of high current capacity for controlling speaker cones and maintaining punch at high volumes.
Equalization Explained
Discusses Gallien-Krueger's unique, bass-specific equalizer design and its benefits over standard graphic equalizers.
Contour Control Function
Details how the contour control revoices the amplifier by adjusting low, mid, and high frequencies.
G.I.V.E. Technology
Explains the use of Gate Induced Valve Effect (G.I.V.E.) technology in pre-amps for optimum harmonic content.
Overdrive Channel
Describes the overdrive channel's unique distortion and sustain capabilities using FETs in a G.I.V.E. configuration.
Smart Protection Circuitry
Details the amplifier's protection systems against unsafe conditions, including short circuits and overheating.
In Closing
Concluding remarks thanking the user and providing contact information for comments and feedback.
Need help?
Do you have a question about the Backline 110 and is the answer not in the manual?
Questions and answers