Related Manuals for Husqvarna 326P5X Series
Summarization of Contents
General Safety Precautions
Important
General safety advice and precautions for safe machine operation.
Personal Protective Equipment
Details on essential protective gear such as helmets, hearing, and eye protection.
Clothing
Guidance on appropriate clothing and attire for safe operation.
First Aid Kit
Recommendation to keep a first aid kit readily available.
Machine's Safety Equipment
Description of the machine's safety features and their importance.
Throttle Lockout
Explanation of the throttle lockout mechanism and its function.
Stop Switch
Instructions on using the stop switch to turn off the engine.
Vibration Damping System
Details on the vibration damping system and its maintenance.
Muffler
Information on muffler function, maintenance, and safety warnings.
Cutting Equipment
Guidance on maintaining and using cutting attachments safely.
Specification of Bar and Saw Chain
Technical specifications for compatible bars and saw chains.
Chain
Details on chain pitch, drive link width, and number of drive links.
Sharpening Chain and Adjusting Raker Clearance
Instructions for sharpening the chain and setting raker clearance.
General Information on Sharpening Cutting Teeth
Advice on proper sharpening techniques for cutting teeth.
Sharpening Cutting Teeth
Step-by-step guide on sharpening cutting teeth using files.
Setting the Raker Clearance
Procedure for adjusting raker clearance using a gauge and file.
Tensioning the Chain
Instructions on properly tensioning the saw chain.
Lubricating Cutting Equipment
Guidance on lubricating the cutting chain and bar for optimal performance.
Chain Oil
Information on recommended chain oil and its properties.
Filling with Chain Oil
Steps for filling the chain oil tank.
Checking Chain Lubrication
How to check if the chain is properly lubricated.
Adjusting Chain Lubrication
How to adjust the oil flow to the chain.
What to Do If Lubrication Does Not Work
Troubleshooting steps for chain lubrication issues.
Bar
Instructions for checking and maintaining the guide bar.
Checking Wear on Cutting Equipment
How to check for wear on the chain, bar, and drive sprocket.
Chain Wear Check
Daily checks for cracks, stiffness, and worn rivets/links.
Chain Drive Sprocket
Guidance on checking and replacing the chain drive sprocket.
Assembly
Fitting the Cutting Head
Steps for attaching the cutting head to the shaft.
Fitting the Bar and Chain
Instructions for mounting the bar and chain onto the cutting head.
Adjusting the Harness
How to properly adjust the harness for comfortable and safe use.
Filling with Oil
Procedure for filling the chain oil tank.
Assembling and Dismantling the Two-Piece Shaft
Instructions for assembling and disassembling the two-piece shaft.
Assembly of the Saw Attachment
Steps for assembling the saw attachment onto the shaft.
Dismantling the Saw Attachment
Procedure for safely removing the saw attachment from the shaft.
Fitting the Impact Guard
How to install the impact guard onto the machine.
Dismantling the Impact Guard
Procedure for safely removing the impact guard.
Fuel Handling
Fuel Safety
Important safety precautions when handling fuel.
Transport and Storage
Guidelines for safely transporting and storing the machine and fuel.
Fuel
Information on required fuel and oil mixture.
Gasoline
Specifications and recommendations for gasoline.
Two-stroke Oil
Details on two-stroke oil type and mixing ratios.
Mixing Ratio
Table showing correct fuel and oil mixing ratios.
Mixing
Step-by-step guide on mixing fuel and oil correctly.
Fueling
Instructions and safety precautions for refueling.
Starting and Stopping
Check Before Starting
Essential checks to perform before starting the machine.
Starting and Stopping
General instructions for starting and stopping the engine.
Cold Engine
Procedure for starting the engine when cold.
Warm Engine
Procedure for starting the engine when warm.
Starting
Detailed steps for starting the engine using the starter cord.
Stopping
How to safely stop the engine using the stop switch.
Working Techniques
General Working Instructions
Basic principles and advice for safe operation.
Personal Protection
Essential personal protective equipment for users.
Safety Instructions Regarding the Surroundings
Precautions for the safety of others and the environment.
Safety Instructions While Working
Guidelines for safe working position and handling.
Safety Instructions After Completing Work
Post-operation procedures for safety and maintenance.
Basic Working Techniques
Techniques for balancing, cutting, and handling the machine.
Maintenance
Carburetor
Information on carburetor function and adjustment.
Function
Explanation of how the carburetor controls engine speed.
Basic Setting
Factory carburetor settings and initial adjustments.
Fine Adjustment
Procedure for fine-tuning the carburetor by a qualified person.
Conditions
Prerequisites for carburetor adjustment, like a clean air filter.
Low Speed Jet L
How to adjust the low speed jet (L) for optimal idling.
Fine Adjustment of the Idle Speed T
Steps to adjust idle speed using the T-screw for correct operation.
Correctly Adjusted Carburetor
Indicators of a correctly adjusted carburetor for performance.
Muffler
Information on muffler function, maintenance, and safety warnings.
High Speed Jet H
How to adjust the high speed jet (H) for engine power and speed.
Cooling System
How to maintain the cooling system for optimal engine temperature.
Spark Plug
Maintenance and replacement of the spark plug.
Two-Piece Shaft
Lubrication advice for the two-piece shaft.
Air Filter
Importance of cleaning and maintaining the air filter.
Cleaning the Air Filter
Step-by-step instructions for cleaning and replacing the air filter.
Oiling the Air Filter
Procedure for oiling the air filter for dusty conditions.
Maintenance Schedule
A detailed schedule of daily, weekly, and monthly maintenance tasks.
Technical Data
Engine
Technical specifications related to the engine.
Ignition System
Details on ignition system components.
Fuel and Lubrication System
Specifications for fuel and lubrication systems.
Weight
Weights of the machine without fuel.
Sound Levels
Measured noise pressure levels at the operator's ear.
Vibration Levels
Measured vibration levels at the handles.
Bar and Chain Combinations
Approved combinations of bars and chains for the machine.
Approved Accessories
List of approved accessories for the machine.
Federal and California Emissions Control Warranty Statement
Your Warranty Rights and Obligations
Details on owner responsibilities and warranty rights.
Manufacturer's Warranty Coverage
Information on emissions control system warranty coverage.
Owner's Warranty Responsibilities
Owner's responsibilities for maintenance and care.
Warranty Commencement Date
When the warranty period for the machine begins.
Length of Coverage
Duration of the emissions control system warranty.
What Is Covered
Specific parts and systems covered by the emissions warranty.
Diagnosis
Rules regarding diagnostic charges for warranty claims.
Consequential Damages
Liability for damages to other components.
Emission Warranty Parts List
List of parts covered under the emissions warranty.
What Is Not Covered
Conditions and failures not covered by the warranty.
Add-On or Modified Parts
Impact of non-exempted add-on or modified parts on warranty claims.
How to File a Claim
Instructions on how to submit a warranty claim.
Where to Get Warranty Service
Information on authorized warranty service locations.
Maintenance, Replacement and Repair of Emission-Related Parts
Use of replacement parts and their effect on warranty.
Maintenance Statement
Owner's responsibility for performing required maintenance.
Need help?
Do you have a question about the 326P5X Series and is the answer not in the manual?
Questions and answers