Configurations - Lexicon 300L - REV Owner's Manual

300L Owner's Manual

Configurations

Connection to a
mixing console's
effects sends
1-10
AES/EBU
TIME CODE IN DO DI
PUSH PUSH
COMM PORT
If you will be using a 300L as your primary effects unit, and your system includes
a console with one or more auxiliary (effects) sends, connect the 300L as shown
above. In most applications, it is preferable to connect the 300L outputs to two
of the console's input channel strips, panned full left and right, rather than the
effects returns. This allows the greatest flexibility in routing and equalization.
In this configuration the console controls are used to set the amount of effect
heard—the 300L's MIX control should be set for 100% wet. If you are using only
one effects send, connect the left and right inputs of the 300L in parallel.
The following diagrams give a few examples of various possible configurations
for interfacing to digital equipment.
Effects Send (L)
Effects Send (R)
Channel Input or
Effects Return (L)
Channel Input or
Effects Return (R)
EIAJ CP340
R OUT
DO DI
DI
DO
MIDI
OUT THRU IN
Lexicon
L OUT R IN L IN
PUSH PUSH
INPUT
GAIN