Yaesu VX-8DR - APRS Manual page 167

APRS/GPS S M
ET ODE
APRS/GPS S M D
APRS/GPS Set Mode Item 15: DIGI PATH
Function: Sets the APRS packet path you wish to path through.
Available Values: P1 ~ P8
Default: P1: OFF, P2: WIDE1-1, P3: WIDE1-1/WIDE2 -1, P4 ~ P8: non
APRS/GPS Set Mode Item 16: GPS DATUM
Function: Select the GPS Datum.
Available Values: WGS-84/Tokyo Mean/Tokyo Japan/Tokyo Korea/Tokyo Okinawa
Default: WGS-84
APRS/GPS Set Mode Item 17: GPS TIME SET
Function: Enables/Disables the GPS clock data to be used.
Available Values: AUTO/MANUAL
Default: AUTO
APRS/GPS Set Mode Item 18: GPS UNIT
Function: Selects the units for GPS information.
Available Values: Position: .MMM'/ 'SS", Speed: km/h/knot/mph, Altitude: m/ft
Default: Position: .MMM', Speed: mph, Altitude: ft
Note: The "Position" item selects the coordinate system. When the "Position" item is set
to ".MMM'", the VX-8DR displays the location (Lat/Lon) in "ddd° mm. mmm" (Decimal
system). When the "Position" item is set to "'SS"", the VX-8DR displays the location (Lat/
Lon) in "ddd° mm ss" (Sexagesimal System). The position information used during APRS
operation is used to display the location (Lat/Lon) in Sexagesimal System, regardless of
this Set Mode setting.
APRS/GPS Set Mode Item 19: MSG GROUP
Function: Selects the filter type option allowing you to receive only the specified types of
APRS Message information.
Available Values: G1 ~ G5, B1 ~ B3
Default: G1: ALL, G2: CQ, G3: QST, G4: YAESU, G5: non, B1 ~ B3: non
VX-8DR O M 165