Yaesu VX-451 Operating Manual page 28

C U /D
Press (or press and hold) the assigned Programmable
key to select a 2-tone/5-tone encode code from the
pre-defined encode list.
C S
Press (or press and hold) the assigned Programmable
key to change the encode digits for 5-tone operation.
To change a specific digit, select the desired digit
using the [ A ] key, then change the number using the
[ B ] / [ C ] keys or input the desired number directly us-
ing the front panel's numeric key (VX-459), and store
the number using the [ D ] key.
A O
S
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the [ A ] / [ B ] key to select the
Auto-Dial memory number list provided by your
Dealer or Network Administrator, then press the PTT
switch. The DTMF tones sent during the dialing se-
quence will be heard in the speaker.
In the VX-459, press (or press and hold) the assigned
Programmable key, then press the front panel's nu-
meric key corresponding to the Auto-Dial memory
number list provided by your Dealer or Network Ad-
ministrator. The DTMF tones sent during the dialing
sequence will be heard in the speaker.
DTMF C
You may send the desired telephone number manually.
To dial a number manually, press (or press and hold)
the assigned Programmable key, then press the de-
sired numbers on the front panel's numeric key. Now,
press the PTT switch to send the telephone number.
The DTMF tones sent during the dialing sequence
will be heard in the speaker.
D
S
VX-459
VX-450 S O M