Related Manuals for Lantronix EPS2-100
Summarization of Contents
Introduction
How to Use This Manual
Explains the structure and recommended reading order of the manual.
Installation
Product Description
Details the physical components and ports of the EPS unit, including front and back panels.
Installation Steps
Provides step-by-step instructions for physically installing the EPS server and its connections.
Getting Started
EZWebCon Configuration
Details the recommended method for configuring the EPS using the EZWebCon software.
Incoming Logins
Explains how to use EZWebCon, LAT, and TCP/IP for server configuration and password settings.
Services
Defines what a service is and how default service names are structured on the EPS.
TCP/IP Configuration
Setting the IP Address
Covers methods for configuring the EPS IP address using EZWebCon, Ping, DHCP, BOOTP, RARP, and command line.
Notes About LPR
Highlights four key points regarding the LPR printing method, including banner pages and job handling.
LPR on Windows NT 4.x
Provides instructions for setting up LPR printing on a Windows NT 4.x host via the Control Panel.
LPR on UNIX Hosts
Explains how to configure LPR print queues on generic UNIX hosts, detailing /etc/hosts and /etc/printcap file modifications.
RTEL Functionality
Describes the RTEL software for enhanced printing flexibility, including special formatting and named pipes.
Unix Host Troubleshooting
Provides a table for troubleshooting TCP/IP issues on UNIX hosts, focusing on server configuration and queue status.
NetWare Configuration
Obtaining an NDS License
Details the process for obtaining an NDS license and configuring the directory service tree and context.
Creating Print Queues Using NetWare Administrator Quick Setup
Guides users on creating NDS and bindery print queues using the NetWare Administrator's Quick Setup option.
Creating NDS Print Queues Using PCONSOLE
Explains how to create NDS print queues using the PCONSOLE utility on a NetWare server.
NetWare Host Troubleshooting
Offers troubleshooting steps for NetWare bindery and NDS modes, covering access tables and password issues.
LAT Configuration
Printing Directly to a Port
Describes how to create a LAT application port and start a print queue for direct printing to a port.
AppleTalk Configuration
Bitronics Interface
Explains the Bitronics interface for bidirectional communication via the parallel port and its requirements.
Macintosh Services
Ensures AppleTalk and PostScript are enabled for printing from a Macintosh.
AppleTalk Zones
Details how the EPS appears in network zones and how to change the default zone setting.
AppleTalk Host Troubleshooting
Provides troubleshooting steps for AppleTalk, focusing on printer selection in the Chooser and bidirectional communication.
LAN Manager/DLC Configuration
DLC Configuration
Explains DLC configuration for Windows NT 4.x hosts, detailing server and host setup.
Contact Information
Technical Support
Provides contact details for technical support, including website, phone, and required problem information.
Troubleshooting
Power-Up Troubleshooting
Addresses potential error situations during the server's power-up sequence related to LEDs and ROM loading.
Printing Problems
Covers general printing issues, checking physical connections, service characteristics, IP address uniqueness, and queue status.
BOOTP Troubleshooting
Offers troubleshooting steps for BOOTP requests, checking system files, download directories, and network configuration.
DHCP Troubleshooting
Provides guidance on troubleshooting DHCP issues, verifying server operation and IP address assignment.
RARP Troubleshooting
Details troubleshooting steps for RARP requests, focusing on host configuration files and operating system settings.
PostScript Problems
Addresses PostScript printer issues, including communication, character configuration, and bitmap graphics printing.
Pinouts
Parallel Information
Discusses parallel port connections, recommending specific compliant cables for optimum performance.
Serial Information
Covers serial port compliance and limitations, including cable length and baud rate constraints.
RJ45 to DB25 Connections
Explains the need for RJ45-DTE/DCE DB25 adapters for connecting RJ45 ports to DB25 connectors.
RJ45 to DB9 Adapter
Details the pinout for RJ45-DTE DB9 adapters, illustrating signal directions for server and terminal connections.
Updating Software
Updating Via the Web
Guides users on downloading the latest EPS.SYS software version from the Lantronix website.
Updating Using FTP
Explains how to download software updates from the Lantronix FTP server, emphasizing binary transfer mode.
Updating Using the BBS
Provides instructions for accessing Lantronix software updates via their Bulletin Board System (BBS).
Reloading Software
Explains the process and important points for updating the Server's Flash ROM with new operational software.
Reloading Sequence
Details the sequence for reloading software, including DHCP/BOOTP/RARP requests and the time taken for the process.
NetWare Software Update
Specifies how to place the EPS.SYS file in the NetWare file server's login directory for software updates.
TCP/IP Software Update
Describes how the Server downloads new software via TCP/IP using DHCP, BOOTP, RARP, and TFTP.
MOP Software Update
Explains how to update the EPS.SYS file using MOP, including enabling service characteristics and reloading.
Troubleshooting Flash ROM Updates
Offers troubleshooting steps for common problems encountered during Flash ROM updates via NetWare, TFTP, and MOP.
Specifications
Power Requirements
Details the power requirements, including voltage, frequency, operating current, power consumption, and cord specifications.
Temperature Limitations
Outlines the operating and storage temperature ranges and maximum temperature change per hour.
Altitude Limitations
Specifies the operating and storage altitude limits for the server.
Relative Humidity Limitations
Defines the operating and storage relative humidity ranges for the server.
Frequently-used Commands
Server Commands
Lists and describes frequently-used commands for managing the Server's general settings and protocols.
Port Commands
Details commands for configuring individual ports, including access, character size, DTR logout, flow control, naming, parity, and speed.
Protocol Commands
Lists commands for enabling/disabling and configuring network protocols like AppleTalk, IP, LAN Manager, LAT, and NetWare.
Need help?
Do you have a question about the EPS2-100 and is the answer not in the manual?
Questions and answers