Table of Contents
Advertisement
Quick Links
HP UPS R7000
User Guide
Abstract
This document includes installation, configuration, and operation information for the HP UPS R7000. This document is for the person who installs and
maintains power products. HP assumes you are qualified in the servicing of high-voltage equipment and trained in recognizing hazards in products
with hazardous energy levels.
Part Number: 637908-003
February 2013
Edition: 3
Advertisement
Table of Contents
Related Manuals for HP R7000 NA
Summarization of Contents
Overview
UPS R7000 Overview
Basic introduction to the HP UPS R7000 model.
UPS R7000 Key Features
Highlights main functionalities, benefits, and capabilities.
Important Safety Information
Critical warnings for safe operation, installation, and maintenance.
Component Identification
UPS Front Panel and Controls
Details of the front interface, display, and control buttons.
UPS Rear Panel Ports and Connectors
Identification of rear-mounted ports, including power and communication.
REPO Port Functionality
Explanation of the Remote Emergency Power Off port's operation.
ERM Rear Panel Description
Description of the Extended Runtime Module's rear panel components.
Installation and Configuration
Installation Precautions and Preparation
Safety warnings, required tools, and initial setup steps.
Site Selection and Equipment Readiness
Choosing an installation site and preparing the UPS unit.
Mounting Rail Installation Guide
Step-by-step instructions for installing rack mounting rails.
Preparing Rails for Integrated Shipping
Specific steps for racks intended for integrated shipping.
UPS Unit Installation Procedure
Physically installing the UPS chassis into the rack.
Connecting Battery Leads
Procedure for connecting the UPS battery cables.
Attaching the UPS Front Bezel
How to install the front cover of the UPS unit.
Connecting Serial and USB Communications
Details on setting up serial and USB connections for management.
Configuring USB to Serial Converter
Steps to set up a USB to serial adapter for communication.
Reassigning USB COM Ports
How to change COM port assignments for USB devices in Device Manager.
Connecting REPO and USB Ports
Connecting the REPO and USB communication ports to the UPS.
Ground Bonding and Network Cable Connection
Connecting grounding wires and Ethernet cables.
Connecting UPS to Utility Power
How to connect the UPS to the main AC power source.
Connecting Devices to UPS Load Outputs
Connecting equipment to the UPS output receptacles.
UPS Network Module Configuration
Steps for configuring the UPS Network Module's settings.
ERM Unit Installation and Charging
Procedures for installing ERM, connecting, and charging its batteries.
UPS Operations
Understanding UPS Operating Modes
Explains Standby, Operate, and Auto-Bypass modes.
Changing UPS Operating Modes
How to switch between different operational states using front panel controls.
UPS Front Panel Configuration Options
Changing language and display settings via the front panel.
Powering Down the UPS Safely
Procedure for shutting down the UPS correctly.
Power Management
Power Protector Software Overview
Introduction to the software for managing UPS features.
Maintenance Procedures
Removing UPS and ERM Front Bezels
Steps for accessing internal components by removing front covers.
Replacing UPS Network Module
Procedure for replacing the hot-swappable network module.
Battery Replacement and Safety
Critical steps and safety precautions for battery service.
UPS and ERM Replacement Procedures
Procedures for replacing the main UPS and ERM units.
Updating UPS Firmware
Instructions for performing firmware updates for the UPS.
Troubleshooting Common Issues
Alarm Troubleshooting and Event Log
Diagnosing problems using alarms and checking the event log.
Resolving Specific Alarm Conditions
Solutions for common alarms like bypass, voltage, and overload.
UPS Startup and Power Switching Issues
Addressing problems with starting the UPS or switching power sources.
UPS Bypass and Battery Operational States
Troubleshooting conditions related to bypass and battery operation.
Specifications
Physical and Environmental Specifications
Dimensions, weight, and operating conditions.
Electrical Input and Output Specifications
Voltage, current, frequency, and receptacle details.
Performance and Battery Specifications
Efficiency, runtime estimates, and battery details.
Environmental and REPO Port Specs
Operating environment details and REPO port specifications.
Spares, Options, and Warranty
Ordering Spare Parts and Hardware Options
Information on obtaining replacement parts and accessories.
Regulatory Compliance and Warranty Information
Safety compliance, limited warranty, and guarantees.
Battery Warranty and Usage Recommendations
Details on battery warranty and suggested lifespan.
Electrostatic Discharge (ESD) Precautions
Preventing ESD Damage to Components
Guidelines to avoid static discharge damage during handling.
ESD Grounding Methods
Techniques and tools for proper grounding to prevent ESD.
Support and Documentation
Contacting HP Support
Information needed and contact methods for technical assistance.
Documentation Feedback Channel
How to provide feedback or report errors in the manual.
Need help?
Do you have a question about the R7000 NA and is the answer not in the manual?
Questions and answers