Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for InFocus AA0021
Summarization of Contents
Unpack and Prepare Projector
Box Contents
Lists projector, remote, cables, and accessories included in the box.
Install Remote Batteries
The remote control requires 2 AA batteries for operation.
Status Indicator Panel Overview
Explains symbols for Power/Standby, Service, Lamp, and Temperature status.
Connect Sources to Projector
Connect to Computer (VGA)
Connects the projector to a computer using a VGA cable.
Connect to DVD, VCR, or other sources
Connects video via Composite/HDMI and audio via RCA cable.
Connect to LAN
Connects the projector via network for LAN input (IN3916 only).
Connect via USB Display and LitePort
Connects via USB for display and LitePort functionality (IN3916 only).
Turn On Projector and Source
Connect Power and Remove Lens Cap
Connect the power cord to the projector and an electrical outlet, then remove the lens cap.
Power On Projector and Wait for Warm-up
Turn on the projector and wait for the lamp to reach full brightness.
Turn On Source Device
Activate the external video port on your computer or source device.
Select Input Source
Use the source button to select the desired input.
Adjust Picture and Use Features
Adjust Height
Use the release button to adjust the projector's height.
Correct Keystone Distortion
Use keystone buttons to make the projected image square.
Focus the Image
Adjust the focus for a clear and sharp image.
Navigate Menu Settings
Use menu and select buttons to adjust picture settings.
Advanced Features and Shutdown
Use LiteBoard™ Interactivity
Charge, connect, and operate the LiteBoard wand for interactive use.
Connect and Adjust Microphone
Connect a microphone and adjust its volume via menu or projector buttons.
Turn Off Projector
Press the power button and wait for the fan to cool the lamp.
Troubleshooting Common Issues
No Picture or Blank Screen
Check power, sources, cables, and computer settings.
Signal Out of Range or Bad Picture
Adjust computer display resolution or refresh rate.
Replace Lamp Indicator
Replace the lamp if the indicator stays on after restart.
High Temperature Indicator
Ensure vents are clear and allow the projector to cool.
Service Required Indicator
Contact service if the indicator persists after restart.
Support and Resources
Online Support and Help
Visit www.infocus.com/support for documentation and help.
Contact Information by Region
Provides customer support telephone numbers for different global regions.
Regulatory and Compliance Information
Details on FCC, Canadian, and agency approvals, plus WEEE directive.
Need help?
Do you have a question about the AA0021 and is the answer not in the manual?
Questions and answers