How To Obtain The Pi50 License - Simrad PI50 - DOWNLOAD AND INSTALLATION REV A Installation Manual

Simrad PI50
6 If you use
Windows 7
a Observe that
about the network.
Select Public, and click
b
7 Observe the start-up procedure in the Getting started chapter.
This chapter is provided in the PI50 Operator manual and PI50 Reference manual.

How to obtain the PI50 license

The PI50 requires a valid license to operate. Without a license you will not be able
to communicate with the PI50 Receiver.
Note
If you replace your computer, or if you replace major components inside your computer,
you will need a new license code.
We strongly advice you to record the license code for safe keeping. You may for example
write it down in the beginning of the reference manual.
1 Double-click the PI50 icon on the desktop to start the application.
Click the icon under the
2
Setup
3 Click
Installation
On the sub-menu, click
4 Write down the
Hardware ID
5 Contact your dealer to order the software license.
Your dealer will need the following information from you to place the order:
• Vessel name and call sign
• Vessel type (trawler, purse seiner, etc.)
• Vessel owner's name, address and contact information
• Hardware ID
6 When the software license is returned, start the PI50, open the
dialog, and click
Write down the code, and click
7
8
operating system:
will open a dialog requesting information
Windows 7 Firewall
Allow access
menu to open the
Main
to open the
Installation
Software License
provided by the
.
Enter Licence String
.
Ok
.
sub-menu.
Setup
sub-menu.
to open the
Software License
Software License
dialog.
dialog.
Software License
346906/A