If the PI50 system is provided with a computer, it is delivered with all necessary software
installed, configured and tested. If you use your own computer, you must do this yourself.
Software upgrades are useful if your PI50 fails, and you suspect a software error. An
upgrade is also required whenever the PI50 software is modified.
To check which software version you have, observe the
menu.
Display
If you experience problems during a software installation or upgrade, write down the
installation parameters. Remove the PI50 software entirely, then reinstall from scratch.
Topics
•
How to install the PI50 software on page 7
•
How to obtain the PI50 license on page 8
•
How to upgrade the PI50 software on page 9
•
How to remove the PI50 software on page 9
How to install the PI50 software
Use this procedure if you need to install the software on a new computer. Note that
minimum hardware and software requirements must be met by the computer.
Power up the computer.
1
2
Insert the PI50 CD-ROM.
If your computer is not fitted with a CD or DVD drive, copy the files from the CD to
a USB memory stick.
3
Observe that the installation program opens.
If the installation program does not start automatically, use a file manager to
access the CD or USB memory stick. Double-click on the
the installation.
4
Allow the installation program to run. Follow the instructions provided.
5
Once the installation has been completed, double-click the program icon on the
desktop to start the application.
346906/A
Software procedures
Software procedures
dialog opened from the
About
file to start
Setup.exe
7