Soundstream CLASS-A-5.0 Owners And Installation Manual
Soundstream technologies owners manual and installation guide stereo amplifier class a 5.0, class a 10.0
Hide thumbs
Also See for CLASS-A-5.0:
- Owner's manual (4 pages) ,
- Owners and installation manual (20 pages)
Advertisement
SERIES AND PARALLEL WIRING
REFERENCE
Class A
5.0 & 10.0
Power Amplifiers
2-4 ohm drivers in parallel
= 2 ohms
OWNERS MANUAL
AND
INSTALLATION GUIDE
4-4 ohm drivers in parallel
=1 ohm
2-4 ohm drivers in series
= 8 ohms
SOUNDSTREAM TECHNOLOGIES
120 Blue Ravine Road
Folsom
California 95630 USA
ph 916.351.1288
fax 916.351.0414
rev B - 4.17.96
20
1
Advertisement
Table of Contents
Related Manuals for Soundstream CLASS-A-5.0
Summarization of Contents
Protection Circuitry and Troubleshooting
Protection Circuitry
Describes circuits protecting against overheating and short circuits.
Troubleshooting
Provides solutions for common problems like no sound, fault LED, or input issues.
LSE.Q Theory and Use
LSE.Q Theory
Explains the subsonic filter's function to remove unwanted bass energy.
LSE.Q Adjustment
Details how to adjust frequency and boost controls for optimal subwoofer response.
LSE.Q Application
Discusses how LSE.Q improves power handling in vented enclosures.
Installation and Mounting
Amplifier Location
Guidelines for securely mounting the amplifier for optimal performance and cooling.
Switches
Instructions on setting mode and crossover switches before installation.
Mounting the Amplifier
Steps for physically attaching the amplifier to a surface.
Wiring
Details on connecting audio signal, remote turn-on, power, and ground cables.
Power and Ground Wiring
Power and Ground Cable Selection
Recommends high-quality, low-loss cables up to 4 gauge for power and ground.
Read this, or sparks will fly!
Special procedure to charge internal capacitance safely and prevent sparks.
Circuit Breakers/Fuses - External
Importance of fusing near the battery to prevent fires in case of shorts.
Coherent Stereo™ / Mixed-Mono / Bridged Mono
Coherent Stereo™
For identical left/right stereo channels, ideal for satellite speakers.
Mixed-Mono
For driving stereo and mono simultaneously, useful for center channels.
Bridged Mono
For dedicated single channel operation, ideal for subwoofers.
Balanced / Unbalanced Input
Advantages of Input Types
Compares Unbalanced RCA and Balanced Pro Audio inputs for noise and signal quality.
Input Signal Level Ranges
Explains selectable input sensitivity ranges (0.2-2V and 0.5-5V).
Using the 'Unbalanced' RCA input
Instructions for using RCA inputs and troubleshooting noise.
Using the 'Balanced' RCA input
Instructions for using the 6-pin DIN balanced input and recommended settings.
Need help?
Do you have a question about the CLASS-A-5.0 and is the answer not in the manual?
Questions and answers