Remington LNT-2 099178H Owner's Manual
Electric chain saw
Hide thumbs
Also See for LNT-2 099178H:
- Owner's manual (25 pages) ,
- Owner's manual (21 pages) ,
- Owner's manual (53 pages)
Table of Contents
Advertisement
ELECTRIC CHAIN SA W
OWNER'S MANUAL
LNT-2: 076728J, 100089-06, & 099178H
EL-1, EL-1 Fast Sharp
EL-7: 075762J, 098031J, 099039J, 100015,
100089-01, 100089-04, 100089-05, & 100089-07
EL-7 Fast Sharp: 076702J
Pole Saw: 104316-01
Pole Saw Assembly: 104317
IMPORTANT: Read and understand this manual before assembling or
operating this chain saw. Improper use of saw can cause severe
injury. Keep this manual for future reference.
MODELS
®
®
Advertisement
Table of Contents
Related Manuals for Remington LNT-2 099178H
Summarization of Contents
Safety Warnings and Precautions
Before Operating Saw: Key Considerations
Essential checks and conditions to ensure safe operation before starting the saw.
While Operating Saw: Safe Practices
Guidelines for safe operation, including awareness, posture, and handling the saw.
Kickback Safety and Prevention
Kickback Safety Devices and Reducing Risk
Features and techniques to minimize the risk of dangerous kickback during operation.
Maintenance for Kickback Prevention
How regular maintenance contributes to safer operation and reduces kickback.
Chain Saw Maintenance and Storage
Pre and Post-Use Inspection Procedures
Essential inspection steps before and after each use to ensure saw safety and condition.
General Chain Saw Care and Upkeep
Routine care for handles, chains, and general upkeep to maintain performance and safety.
Proper Storage Guidelines
Instructions for safely storing the chain saw when it is not in use.
Product Identification and Components
Unpacking and Initial Inspection
Steps for removing items from the carton and checking for damage.
Chain Saw Assembly
Assembling Guide Bar, Chain, and Hand Guard
Detailed steps for attaching the guide bar, chain, and front hand guard to the saw body.
Saw Chain Tension Adjustment
Adjusting Saw Chain Tension
Step-by-step guide for properly adjusting the chain tension for safe and efficient cutting.
Filling the Oil Tank
Oil Tank Filling Procedure
Instructions for filling the chain saw's oil tank with the correct type of oil.
Operating the Chain Saw
Extension Cord Usage and Requirements
Guidelines for selecting and using appropriate extension cords with the chain saw.
Oiling the Chain During Operation
How to properly oil the chain and guide bar before and during operation.
Safe Cutting Procedures
Detailed steps for performing cuts safely, including starting, gripping, and finishing.
Felling a Tree
Before Felling a Tree: Preparation
Steps to take before felling a tree, including inspection, clearing, and planning.
Creating the Felling Notch
Procedure for making the felling notch to direct the tree's fall.
Making the Felling Cut
Instructions for making the final felling cut and leaving a hinge for control.
Limbing a Tree
Safe Limbing Techniques
Methods for safely removing branches from a fallen tree, avoiding pinch and kickback.
Bucking a Log: Procedures
Bucking Logs on Ground
Techniques for bucking logs that are on the ground, ensuring stability and safety.
Bucking Logs Supported on One End
Procedure for bucking logs supported at one end, preventing splintering and pinching.
Trimming a Tree (Pruning)
Safe Trimming Techniques and Cut Procedures
Steps for safely trimming branches, including specific cuts to avoid damage and ensure safety.
Cleaning and Maintenance Overview
Cleaning the Saw Body
Instructions for cleaning the exterior of the chain saw body using safe methods.
Guide Bar Care and Maintenance
Normal Guide Bar Maintenance Procedures
Routine maintenance for the guide bar, including cleaning grooves and removing burrs.
Sharpening Saw Chain (Non-Fast Sharp)
Tools Needed for Chain Sharpening
List of essential tools required for sharpening the chain on non-fast sharp models.
Sharpening Chain Cutters
Step-by-step guide for sharpening the chain cutters using a file and guide.
Filing Cutter Depth Gauges
Adjusting Depth Gauges
Procedure for filing and rounding off cutter depth gauges for optimal chain performance.
Sharpening Saw Chain (Fast Sharp Model)
Fast Sharp Chain Sharpening Procedure
Instructions for using the automatic sharpener to maintain the Fast Sharp chain.
Replacing the Saw Chain
When and How to Replace Saw Chain
Guidance on when to replace the saw chain and the importance of using correct replacement parts.
Troubleshooting Common Issues
Cutting Performance Problems
Addresses issues like saw not cutting, slow cutting, or sawdust production.
Operational and Starting Issues
Troubleshooting problems with the motor not running, stalling, or chain not moving.
Chain and Lubrication Issues
Resolving problems related to chain oiling, chain slipping off, smoking, or oil leaks.
Storage Instructions
Preparing Saw for Storage
Steps for preparing the chain saw for long-term storage, including draining and cleaning.
Repair Service Information
Warranty Service Procedures
Instructions for obtaining warranty service, including proof of purchase requirements.
Non-Warranty Service Procedures
Information on service for non-warranty repairs and associated costs.
Need help?
Do you have a question about the LNT-2 099178H and is the answer not in the manual?
Questions and answers