FORIOUS FB-03108G Manual

When installing the inlet hose,
push the hose inward and rotate
it until both rubber rings are
securely tucked inside the handle.
9.
8.Install by slightly rotating until
you hear a 'click,' indicating that
the installation is complete.
Note: When properly fastened,
the blue buckle will pop up as
shown in the right picture. If the
blue buckle is in the position
shown in the left picture, the
a
installation is not secure!
b b 10.Install drain body 4
3 attached,into the drain hole.
b a b
Note: Before installation, flush out
the hard water first, then connect
the inlet hose to the valve.
12.Fasten the locknut to the drain
and tighten.
,with gasket 11.Install gasket 2 attached,into
the drain hole under the sink
13.Complete installation