Veken SHC7V107 Directions For Use

Rain Shower Head With
Handheld Shower Head
DIRECTIONS FOR USE
B
C
ADJUSTING THE HEIGHT AND ANGLE OF THE SHOWER
A.Rain Shower
Loosen the two handles of the
extension arm by turning
counterclockwise. Adjust to a
suitable angle and height, then
secure by tightening the handles
of the extension arm.
! Note: Note that the bracket needs to be rotated to either the left or right side of the slide bar.
ADJUSTING SHOWER MODES
A
A-Rain shower mode
B-Dual mode
C-Hand-held mode
B.Hand Shower
WHAT'S IN THE PACKAGE?
Rain Shower Head x 1
Slide Bar
& Shower Head
Bracket x 1
Teflon Tape x 1
Spare Washers x 2
1.Press and
hold the button
on the bracket
to loosen it .
3.Choose your
favorite height
and release the
button to fix the
bracket.
Handheld
Shower Head x 1
Integrated Tri-Arm
Extension x 1
60 Inch Wrench
Hose x 1 x 1
Only use Teflon tape on the
threads of the shower pipe if
there is a leak. Do not use it on
any other connections.
Spare washers are used for
water leaks at connections due
to missing washers. Use only
one per connection.
USING POWER WASH
2.Holding the
button, you can
move up and
down and rotate
the bracket.
4.Put the handheld
on the bracket,
swing it back and
forth to adjust your
favorite angle.