PRODUCT PARTS Bidet x 1 Positioning Discs x 1 Rubber washer 7/8" 3/8" T-valve 0.7m braided hose x 1 (7/8" x 7/8" x 3/8") 7/8" YOU WILL NEED TO PREPARE Wrench Screwdriver PRE-INSTALLATION 1.First connect the bidet to the positioning discs by inserting the metal hooks into the slots.
INSTALLATION 1.Connect one end of the hose to the water inlet under the bidet. Stainless steel hose installation 2. Turn off the water supply and drain the water from the toilet water tank. Try to make sure there is no water left in the water tank. Turn off the water supply.
Page 4
(3.2) Slowly lift the toilet seat, and adjust the position of the bidet positioning disc, and insert it into the gap. Make sure the nozzle of the bidet is located in the center of the toilet and close to the back rim of the toilet bowl. Make sure the nozzle of the bidet is located in the center of the toilet and close to the...
6. Connect the stainless steel hose 7 Slowly turn the water supply back (provided) to the open end of the T-valve. on and check leakage, as well as the function of bidet. Turn on the water supply Stainless steel hose installation PRODUCT STRUCTURE Nozzle Position Positioning Discs...
OPERATING INSTRUCTIONS POSTERIOR WASH “ ” From the middle (OFF) position, turn the handle to the left past the “ ” sign and proceed towards the “ ” sign to activate the posterior wash feature. Turning more to the left will increase the water pressure. The nozzle position is adjustable by pushing or pulling the nozzle adjustment button.
Page 8
Thank you for choosing us! 30 days free return or exchange for any reason 2 YEARS product warranty (For any product quality issues, free return or replacement will be provided) Lifetime Customer Support Tell: 1-888-281-8150 (Monday-Friday 9am-5pm CST) Email: support@aborderproducts.com (Monday-Friday 9am-5pm CST)
Need help?
Do you have a question about the ULTRA SLIM and is the answer not in the manual?
Questions and answers