Table of Contents
Advertisement
Remote Power On/Off (Only for Vista T220)
Introduction
Compro has always focused on developing products of great convenience.
VideoMate Vista T220 PCI card features the Remote Power On/Off function for
greater convenience. This section explains the details.
Integration of hardware and software support, you can start your computer
from the shut down state by pressing a button on the remote keypad. You don't
need to reach over to your computer anymore. You can also shut down the
computer by remote control as well. No more mouse click on the screen. This
feature converts your PC into a convenient home entertainment video
appliance.
Using Remote Power On/Off
Make sure you follow the instructions of the installation guide. You will be able
to use Remote Power On/Off immediately.
Remote Power On
Please put batteries in the remote control. Pressing the power button which
is on the top of remote control, it will start your computer. If the computer
does not start up, you may have to install the TV card's driver correctly and set
a schedule first in order to use this feature.
Note
You must correctly install the Power Up connectors to use Remote Power
On/Off function. See Hardware Installation section above for more information.
There will be a two second delay before the PC powers on.
You have to install the TV card's driver correctly before using this feature.
This feature cannot logon your system. You may need to enter your user name
and password.
Remote Power Off
There are two situations for this operation.
When not watching TV, i.e. no ComproDTV 4 running:
16
Advertisement
Table of Contents
