Remote Power On/Off - COMPRO M3F - STARTUP Manual

Remote Power On/Off

(Vista M3F only support Remote power off)
Introduction
Compro has always focused on developing products of great convenience.
VideoMate Vista M3F/M5F PCI card provides the remote controlled power off
(shutdown) and Vista M5F features the remote power on from system
shutdown mode for greater convenience. This section explains the details.
Integration of hardware and software support, you can start your computer
from the shut down state by pressing a button on the remote keypad. You don't
need to reach over to your computer anymore. You can also shut down the
computer by remote control as well. No more mouse click on the screen. This
feature converts your PC into a convenient home entertainment video
appliance.
Using Remote Power On/Off
Make sure you follow the instructions of the installation guide. You will be able
to use Remote Power On/Off immediately.
Remote Power On
Please put batteries in the remote control. Pressing the yellow button of the
last line of remote control, it will start your computer. If the computer does
not start up, you may have to install the TV card's driver correctly and set a
schedule first in order to use this feature.
Note
You must correctly install the Power Up connectors to use Remote Power On
function. See Hardware Installation section above for more information.
There will be a two seconds delay before the PC powers on.
You have to install the TV card's driver correctly before using this feature.
This feature cannot logon your system. You may need to enter your user name
and password.
13