COMPRO W700 - START UP GUIDE Manual page 10

OSD Menu Guide
Menu button will open up OSD Menu, please use the direction key to navigate.
Brightness
Contrast
Saturation
Hue
Sharpness
OptiMode
Input Signal
Channel Video
System
Channel Rename Set a name for specific channel. (5 letter/numbers)
Auto Scan
Channal Edit
Finetune
CH........
Resolution
Noise Reduction
OptiRatio
Input Source
Position Finetune Use right and left direction key to adjust the position of
10
Picture
Adjust the brightness (0~100)
Adjust the Contrast (0~100)
Adjust the Saturation (0~100)
Adjust the Hue ( 0~100)
Adjust the Sharpness (0~15)
3 preset modes (Standard/TV, Game, and Cinema) and 5
custom modes of picture settings. You can adjust the color
settings then save it in custom mode.
TV Function
Select Air or Cable for TV input signal type.
Default is Cable.
Change video standard for current channel.
(Only appears in countries with 2 or multiple TV systems)
Recommend to use Auto Scan for the first time. (NO/YES)
Advanced channel edit in TV
Fine tune frequency if TV is unclear. (0~100) default is 50
Custom Channel
Add and edit your custom channel
Resolution
Swtich resolution: 800x600  1024x768 (default) 
1280x1024  1440x1050  1400x900  1680x1050 
1600x1200  1920x1080  1920 x1200
Adjust level of noise reduction. (0~8) Default is 4
4:3 16:9
Analog TV, Composite, S-Video , Component
screen
SmartZoom Panorama Full