MGI zip Series How-To

HOW TO INSTALL YOUR
COOLER & STORAGE BAG
THE FOLLOWING DOCUMENT MUST BE READ TO ASSIST YOU TO PROPERLY
INSTALL YOUR NEW MGI COOLER & STORAGE BAG.
DESIGNED WITH A SIMPLE BRACKET MECHANISM THAT ALLOWS THE COOLER
& STORAGE BAG TO EASILY CLIP ON AND OFF ANY ZIP SERIES FRAME.
ASSEMBLY
1. Remove all parts from packaging.
2. Locate the neck of the handle on your Zip Series model, above the top bag support (see Diagram 1).
3. Push the clasp over the handle (see Diagram 2). The holes on the clasp should
be pointing up (see Diagram 3).
4. Slide the bag onto the clasp (see Diagram 4).
5. Attach the bottom bag strap around the handle, below the top bag support (see Diagram 5).
MGI AUSTRALIA
E sales@mgigolf.com
SERVICE customerservice@mgigolf.com
Follow us
mgigolf mgigolf
Diagram 3
MGI USA
E salesusa@mgigolf.com
SERVICE serviceusa@mgigolf.com
USER MANUAL: www.mgigolf.com/manuals
ENGLISH / FRANÇAIS / PORTUGUÊS / ESPAÑOL /
ITALIANO / DEUTSCHE / 日本人 / 中文
www.mgigolf.com
Diagram 1
Diagram 4
MGI GLOBAL
E globalsales@mgigolf.com
Diagram 2
Diagram 5