Download Print this page

Vangoa B08FHTSNJQ Troubleshooting

500w fog smoke machine with 3 led lights

Advertisement

Quick Links

Troubleshooting
PROBLEM
Can not turn on
The remote control
is insensitive
The product makes
a humming sound
The brightness is
not bright enough
If the failure can not be eliminated according to the above method, we will provide you two-year warranty.
If you have any questions, please send us an email and we will reply you within 12 hours!
POSSIBLE CAUSES
The atuo button is not on
power is insufficient
the transparent insulation label at the
bottom of the remote control is not
torn off
Remote control transmission is not aligned
with the product receiver
The line of the product touches the
built-in fan
The lubricating oil of the motor is not
moist enough
The battery may be low
REMEDY
check whether the power switch is in AUTO mode, whether
the transparent insulation label at the bottom of
the remote control is torn off, whether the power of the
host is enough, After the above three conditions are met,
the product can be opened.if the power is insufficient,
you need to charge the USB cable first
The remote control must point to the host to receive the
signal, and the farthest distance of the remote control to
send the command to the host is 5 meters.it will show
perfect atmosphere to cover around 50 square
meters room
Move the line
Contact sale sellers
Charge it fully

Advertisement

loading
Need help?

Need help?

Do you have a question about the B08FHTSNJQ and is the answer not in the manual?

Questions and answers