NADAMOO EP2600 User Manual
  1. Manuals
  2. Brands
  3. NADAMOO Manuals
  4. Barcode Reader
  5. EP2600
  6. User manual
NADAMOO EP2600 User Manual

NADAMOO EP2600 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
V 2.13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EP2600 and is the answer not in the manual?

Questions and answers

Related Manuals for NADAMOO EP2600

Summary of Contents for NADAMOO EP2600

  • Page 1 USER GUIDE V 2.13...
  • Page 2 About This User Guide Pls read all the content of the user guide carefully to use the products safely and effectively. You are advised of keeping it properly for your using reference. Disclaimer Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide warranty or replacement service.
  • Page 3 Version Record Version number Version description Version date Initial version 2020-08-27...

  • Page 4: Table Of Contents

    1、Connect scanner................................6 1.1 Enable/Disable Parameter Bar Code Scanning......................6 Enable Par amet er Bar Code Scanning (Def ault ) ................6 Disable Par amet er Bar Code Scanning ....................6 Fir mwar e Ver sion ..............................6 1.2 Restore Factory Defaults..............................6 1.3 User Defaults..................................7 Save User Default s .............................7 Rest ore User Def ault s ............................7...
  • Page 5 7.1 Upload setting................................29 7.2 Data field setting................................30 7.3 Inverse code option................................30 8、Symbologies..................................31 8.1 Enable/disable All Symbologies..........................31 8.2 Enable/disable All 1d Symbologies........................31 8.3 Enable/Disable All 2d Symbologies........................32 8.4 Codabar..................................32 8.5 Codabar Start/ending Character Setting.......................32 8.6 Codabar Limitation Of Length......................... 33 8.7 Code 39..................................33 8.8 Code 39 Check Bit............................
  • Page 6 9.17 GS1 DataBar（RSS14）............................47 9.18 GS1 DataBar Limited............................. 47 9.19 GS1 DataBar Expanded............................47 9.20 MSI.................................... 48 9.21 MSI check bit output............................48 9.22 MSI check bit option............................48 9.23 Code MSI two Check Bit..........................49 9.24 MSI length limitation............................49 9.25 Febraban.................................. 49 9.26 Code Febraban（CODE128）........................

  • Page 7: 1、Connect Scanner

    1、Connect scanner Connect the barcode scanner to the special connector on the attached cable, and plug the other end into the corresponding port of PC. If the configuration code has been turned off, please refer to 1.1 to Enable Parameter Bar Code Scanning . 1.1 Enable/Disable Parameter Bar Code Scanning When the configuration code is turn on, All configuration codes available;...

  • Page 8: User Defaults

    1.3 User Defaults Save the current menu settings as user-defined menu settings. Save User Defaults You can restore the menu settings for the user-defined menu settings. Restore User Defaults 1.4 USB Keyboard Setting 1.4.1 Character Escape Enable Character Escape Disable Character Escape（Default） 1.4.2 OA &...

  • Page 9: Usb Keyboard Update Speed Setting

    Only 0A(LF) Line Feed Only 0D(CR)Line Feed（Default） Both 0A(LR) and 0D(CR) Line Feed 1.5 USB keyboard update speed setting These barcode are used to set the update speed when scanner is in USB keyboard pattern. If the performance of your PC is lower, we suggest you choose slow update speed to make sure the scanner update the right data.

  • Page 10: Usb Keyboard Text-Transform

    User Defined Speed（2ms~50ms） 1.6 USB Keyboard Text-Transform Normal Output（Default） Case Reversal All Caps Lower Case 1.7 Keyboard Layouts English (United States) （default） French (France) Italian (Italy)
  • Page 11 Italian 142 (Italy) German (Germany) Spanish (Spain) Spanish (Latin America) Finnish Japanese Russian (MS) Russian (typewriter)
  • Page 12 Arabic (101) Irish Polish (214) Polish (Programmers) Dutch (Netherlands) Czech (QWERTZ)
  • Page 13 Portuguese (Portugal) Portuguese (Brazil) Swedish (Sweden) Turkish Q Turkish F Greek (MS) French (Belgium)

  • Page 14: Virtual Keyboard Settings

    English (UK) 1.8 Virtual Keyboard Settings Mode 1: Characters between 0x20 and 0xFF are output by virtual keyboard mode which is not supported in current keyboard layout. Characters between 0x00 and 0x1F are output according to control character definition (see appendix). Mode 2: All characters between 0x20 and 0xFF are output by virtual keyboard.

  • Page 15: Unicode Output

    MAC OS LINUX 1.10 UNICODE output English/Latin-1（ default） GBK（ TXT /excel） UNICODE（ Word ） 2.1 Serial port setting 2.1.1 Baud rate 4800...

  • Page 16: Serial Data Bit, Stop Bit, Check Bit Configuration

    9600（default） 19200 38400 57600 115200 2.3.2 Serial Data Bit, Stop Bit, Check Bit Configuration 7 data bits ， 1 stop bits ， no check bit 7 data bits ， 1 stop bits ， even check bit...
  • Page 17 7 data bits ， 1 stop bits ， odd check bit 7 data bits ， 2 stop bits ， no check bit 7 data bits ， 2 stop bits ， even check bit 7 data bits ， 2 stop bits ， odd check bit 8 data bits ，...

  • Page 18: Gs Control Character Replacement

    8 data bits ， 1 stop bits ， odd check bit 8 data bits ， 2 stop bits ， no check bit 8 data bits ， 2 stop bit ， even-parity check 8 data bits ， 2 stop bits ， odd-parity 2.2 GS Control character replacement No Replacement（Default）...

  • Page 19: Control Character Output

    Replace To ^] Replace To ] Replace To <GS> 2.3 Control character output Not output Output（default）...

  • Page 20: 3、Scan Mode

    3、Scan mode 3.1 Disable auto sense scan mode Disable auto sense scan mode（ default ） 3.2 Enable auto sense scan mode Enable auto sense scan mode 3.3 Timeout between decodes (Same barcodes) 500ms 750ms（default）...

  • Page 21: Single Decoding Timeout

    3.4 Single decoding timeout...

  • Page 22: 4、Led Notifications

    4、LED notifications 4.1 LED control under status to be activated LED Low brightness 4.2 Good-read LED Good-Read LED Off Good-Read LED On（ Default） 5、 Beeper 5.1 Beeper Volume setting...

  • Page 23: Start-Up Beep

    Volume Low Volume High（ Default） 5.2 Start-up beep Shut Down Start-Up Beep Open Start-Up Beep （ Default ） 5.3 Good read beep Good Read Beep Off Good Read Beep On （ default ）...

  • Page 24: Beep Pitch-Good Read

    5.4 Beep pitch-good read Pitch 1 （ default） Pitch 2（ 2.7K） Pitch 3 5.5 Beep duration-good read Tone Long （ default ） Tone Pip 5.6 Error sound You will hear 4 continue alarm sounds when data upload failure, one single alarm sound means scan indistinguishableness barcode.

  • Page 25: 6、 Prefix And Suffix

    Error Sound Low Pitch （ default ） Error Sound Middle Pitch Error Sound High Pitch 6、 Prefix and Suffix 6.1 Prefix Setting Cancel prefix（default） <STX> <Data> 6.2 Suffix setting Cancel suffix...

  • Page 26: User-Defined Prefix

    <Data> <CR>(Carriage Return) <Data> <LF> <Data> <CR> <LF>（default） <Data> <TAB> <Data> <ETX> 6.3 User-defined prefix Output...

  • Page 27: User-Defined Suffix

    Enable User-Defined Prefix Disable User-Defined Prefix（default） Edit Clear All User-Defined Prefix User-Defined Prefix (After scan this code you can set the prefix you want based on the data and barcode in table ID) 6.4 User-defined suffix Output Enable User-Defined Suffix Disable User-Defined Suffix（default）...

  • Page 28: Code Id

    Clear All User-Defined Suffix User-Defined Suffix (After scan this code you can set the suffix you want based on the data and barcode in table ID) 6.5 Code ID Output Option Disable CODE ID（default） Enable CODE ID Before The Barcode Enable CODE ID After The Barcode Edit User-Defined CODE ID...

  • Page 29: Aim Id

    Clear All User-Defined CODE ID 6.6 AIM ID Disable AIM ID（default） Enable AIM ID Before The Barcode Enable AIM ID After The Barcode 6.7 Prefix and suffix order Prefix Prefix+CODE ID+AIM ID+User-defined prefix （default）...

  • Page 30: 7、Data Editing

    Prefix+User-defined prefix+CODE ID+AIM ID Suffix User-defined suffix+CODE ID+AIM ID+suffix（default） CODE ID+AIM ID+User-defined suffix+suffix 7、Data editing The data editing function can customize the data field with complete barcode content to start / Center / end by configuring the length of start / end field. Please configure the length and transmission of the start / end field according to the actual needs.

  • Page 31: Data Field Setting

    Upload Center data field Upload End data field 7.2 Data field setting Set Start field Set End field Note: the field length is configured in bytes, using decimal data. For example: set the start segment length to 10 bytes, scan the bar code for setting the start segment length, scan the data in the appendix and edit 1, 0 in the barcode, and save to complete the configuration.

  • Page 32: 8、Symbologies

    Only Decode Inverse Code Decode Both Normal Code And Inverse Code 8、Symbologies 8.1 Enable/disable All Symbologies Enable all barcode might slow down scanner decode speed. We suggest enable the barcode you need based on your scene. Enable all barcode is default Enable All Symbologies Disable All Symbologies...

  • Page 33: Enable/Disable All 2D Symbologies

    Disable All 1dSymbologies 8.3 Enable/Disable All 2d Symbologies Enable All 2d Symbologies Disable All 2d Symbologies 8.4 Codabar Enable Codabar Disable Codabar 8.5 Codabar Start/ending Character Setting Don’t Send Codabar Start/Ending Character（Default）...

  • Page 34: Codabar Limitation Of Length

    Send Codabar Start/Ending Character 8.6 Codabar Limitation Of Length Codabar Min Length（0~50 bits） Codabar Max Length（0~50 bits） 8.7 Code 39 Enable Code 39 Disable Code 39 8.8 Code 39 Check Bit Disable Code 39 Check（Default）...

  • Page 35: Code 39 Full Ascii

    Enable Code 39 Check Don’t Send Check Bit Enable Code 39 Check Send Check Bit 8.9 Code 39 Full ASCII Enable Full ASCII Disable Full ASCII（Default） 8.10 Code 39 Limitation Of Length Code 39 Min Length（0~50 Bits） Code 39 Max Length（0~50 Bits）...

  • Page 36: Code 32 （Code 39 Needs To Be Enabled

    8.11 Code 32 （Code 39 Needs To Be Enabled） Enable Code 32 Disable Code 32 8.12 Code 32 prefix Enable Code 32 prefix Disable Code 32 prefix（default） 8.13 Interleaved 2 of 5（ITF25） Enable ITF25 Disable ITF25...

  • Page 37: Interleaved 2 Of 5（Itf25）Check Bit

    8.14 Interleaved 2 of 5（ITF25）Check Bit Disable ITF25 Check（Default） Enable ITF25 Check Don’t Send Check Bit Enable ITF25 Check Send Check Bit 8.15 Interleaved 2 of 5（ITF25）Length Setting ITF25 No Fixed Length（4-24）（Default） ITF25 Fixed Length of 6 Digitals ITF25 Fixed Length of 8 Digitals...
  • Page 38 ITF25 Fixed Length of 10 Digits ITF25 Fixed Length of 12 Digits ITF25 Fixed Length of 14 Digits ITF25 Fixed Length of 16 Digits ITF25 Fixed Length of 18 Digits ITF25 Fixed Length of 20 Digits ITF25 Fixed Length of 22 Digits ITF25 Fixed Length of 24 Digits...

  • Page 39: Interleaved 2 Of 5 Limitation Of Length

    8.16 Interleaved 2 of 5 Limitation of Length Interleaved 2 of 5 Min Length（0~50 Bits） Interleaved 2 of 5 Max Length（0~50 Bits） 8.17 Industrial 2 of 5/IATA Enable Industrial 2 of 5 Disable Industrial 2 of 5 8.18 Industrial 2 of 5 Limitation of Length Interleaved 2 of 5 Min Length （0~50 bits）...

  • Page 40: Matrix 2 Of 5（4-24

    8.19 Matrix 2 of 5（4-24） Enable Matrix 2 of 5 Disable Matrix 2 of 5 8.20 Matrix 2 of 5 Limitation of Length Matrix 2 of 5 Min Length（0~50 Bits） Matrix 2 of 5 Max Length（0~50 Bits） 8.21 Code 93 Enable Code 93 Disable Code 93...

  • Page 41: Code 93

    8.22 Code 93 Limitation of Length Code 93 Min Length（0~50 bits） Code 93 Max Length（0~50 bits） 8.23 Code 11 Enable Code 11 Disable Code 11（Default） 8.24 Code 11 check bit output Enable Code 11 Check Bit Output Disable Code 11 Check Bit Output（Default）...

  • Page 42: Code 11 Check Bit Option

    8.25 Code 11 check bit option Disable Code 11（Default） Code 11 One Check Bit Code 11 Two Check Bits 8.26 Code 11 length limitation Code 11 Min Length Limit（0~50 bits） Code 11 Max Length Limit（0~50 bits）...

  • Page 43: 9、128 码

    9、128 码 9.1 Code 128 Enable Code 128 Disable Code 128 9.2 ISBT-128 Disable ISBT 128 Enable ISBT 128 9.3 GS1-128 Enable GS1-128 Disable GS1-128...

  • Page 44: Code 128 Length Limitation

    9.4 Code 128 length limitation Code 128 Min Length Llimit（0~50bits） Code 128 Max Length Limit（0~50bits） 9.5 UPC-A Enable UPC-A Disable UPC-A 9.6 UPC-A check bit Send UPC-A Check Bit（Default） Don’t Send UPC-A Check Bit...

  • Page 45: Upc-A To Ean-13

    9.7 UPC-A to EAN-13 Enable UPC-A To EAN-13 Disable UPC-A To EAN-13（Default） 9.8 UPC-E Enable UPC-E Disable UPC-E 9.9 UPC-E check bit Send UPC-E Check Bit（Default） Don’t Send UPC-E Check Bit 9.10 UPC-E to UPC-A...

  • Page 46: Ean/Jan-8

    Enable UPC-E To UPC-A Disable UPC-E To UPC-A（Default） 9.11 EAN/JAN-8 Enable EAN/JAN-8 Disable EAN/JAN-8 9.12 EAN-8 to EAN-13 Disable EAN-8 to EAN-13（default） Enable EAN-8 to EAN-13 9.13 EAN/JAN-13 Enable EAN/JAN-13...

  • Page 47: Upc/Ean/Jan Extra Code

    Disable EAN/JAN-13 9.14 UPC/EAN/JAN extra code Ignore UPC/EAN/JAN Extra code（default） Decode UPC/EAN/JAN Extra code Auto adapt UPC/EAN/JAN Extra code 9.15 EAN13 to ISBN Enable EAN13 Turn ISBN Disable EAN13 Turn ISBN（Default） 9.16 EAN13 to ISSN Enable EAN13 Turn ISSN...

  • Page 48: Gs1 Databar（Rss14

    Disable EAN13 Turn ISSN（Default） 9.17 GS1 DataBar（RSS14） Enable GS1 DataBar Disable GS1 DataBar 9.18 GS1 DataBar Limited Enable GS1 DataBar Limited Disable GS1 DataBar Limited 9.19 GS1 DataBar Expanded Enable GS1 DataBar Expanded Disable GS1 DataBar Expanded...

  • Page 49: Msi

    9.20 MSI Enable code MSI Disable code MSI（default） 9.21 MSI check bit output Enable MSI Check Bit Output Code MSI Check Bit Output（default） 9.22 MSI check bit option Code MSI One Check Bit （default） Code MSI two Check Bit...

  • Page 50: Code Msi Two Check Bit

    9.23 Code MSI two Check Bit MOD10/MOD10 （default） MOD10/MOD11 9.24 MSI length limitation MSI Min Length Limit （0~50 位） MSI Max Length Limit（0~50 位） 9.25 Febraban Note: please turn off AIM ID function before opening Frbraban function. Enable code Febraban（ITF25） Disable Febraban（ITF25）...

  • Page 51: Code Febraban（Code128

    9.26 Code Febraban（CODE128） Enable code Febraban（CODE128） Disable code Febraban（CODE128） （default） 9.27 Febraban check bit Enable code Febraban check bit Disable code Febraban check bit（default） 9.28 PDF417 Enable PDF417 Disable PDF417...

  • Page 52: Micro Pdf417

    9.29 Micro PDF417 Enable Micro PDF417 Disable Micro PDF417 9.30 QR Code Enable QR Disable QR 9.31 Micro QR Enable Micro QR Disable Micro QR...

  • Page 53: Data Matrix

    9.32 Data Matrix Enable Data Matrix Disable Data Matrix 9.33 Aztec Code Enable Aztec Disable Aztec...

  • Page 54: Appendix

    APPENDIX Appendix 1 Data and editing code...
  • Page 56 Cancel Current Setting Cancel All Data Read Before Cancel The Data Read Last Time Save...

  • Page 57: Appendix 2 Code Type Id Table

    Appendix 2 Code Type ID Table Code type CODE ID(default) All codes Codabar Code128 Code32 < Code93 Code39 Code11 EAN-13 EAN-8 GS1 DataBar GS1-128 (EAN-128) 2 of 5 Interleaved 2 of 5 Matrix 2 of 5 Industry 2 of 5/IATA UPC-A UPC-E ISBN...

  • Page 58: Aim Id Table

    AIM ID TABLE Code AIM ID Explain Codabar m：0~1 Code128 m：0，1，2，4 Code32 Code93 Code39 m：0，1，3，4，5，7 Code11 m：0，1，3，8，9 EAN-13 / EAN-8 m：0，1，3，4 GS1 DataBar GS1-128 (EAN-128) Interleaved 2 of 5 m：0，1，3 Matrix 2 of 5 Industry 2 of 5/IATA UPC-A/ UPC-E m：0，3 ISBN ISSN...

  • Page 59: Appendix 3 Eyeball Character Ascii Table

    Appendix 3 Eyeball character ASCII table Decimal Hexadecimal Character Decimal Hexadecimal Character Decimal Hexadecimal Character <SPACE> “ & ‘...

  • Page 60: Appendix 4 Operational Character（Usb Keyboard

    < > Appendix 4 Operational character（USB keyboard） Corresponding key value （ disable Corresponding key value （ enable CODE ID ） CODE ID ） DecimalHexadecimal retain Ctrl+@ Insert Ctrl+A Home Ctrl+B Ctrl+C Delete Ctrl+D PageUp Ctrl+E PageDown Ctrl+F Ctrl+G Backspace Ctrl+H Ctrl+I Enter （The configuration of CRLF Ctrl+J...
  • Page 61 Enter （The configuration of CRLF Ctrl+M processing decide how it express ） Scroll Lock Ctrl+N Pause/Break Ctrl+O Ctrl+P Direction key ↑ Ctrl+Q Direction key ↓ Ctrl+R Direction key ← Ctrl+S Direction key → Ctrl+T Ctrl+U Ctrl+V Ctrl+W Ctrl+X Ctrl+Y Ctrl+Z Ctrl+[ Ctrl+\ Ctrl+]...

  • Page 62: Appendix 5 Operational Character（Serial Port And Usb-Vcom

    Appendix 5 Operational character（serial port and USB-VCOM） Decimal HexadecimalCharacter...

  • Page 63: Configuration Instruction And Example

    Configuration Instruction And Example Example for user-defined prefix and suffix: You can edit 10 characters as prefix or suffix. (In order to make sure the prefix and suffix can output normally, please enable user-defined prefix or suffix first) Example 1.1： Add XYZ to all type of barcode as prefix. Look up appendix 2, you can find that the HEX value for all codes is “99”.
  • Page 64 Example 1.3： Cancel user-defined prefix in QR code When you edit user-defined prefix and suffix, it will cancel the prefix and suffix you set if you scan “user-defined prefix” or “user-defined suffix” and add no character and save. For example, cancel user-defined prefix in QR code, first scan “user-defined prefix”, then scan 7,3, and save.
  • Page 65 security When using the scanning gun, the light is strong. Do not look directly or aim at the eyes, so as not to cause discomfort or injury.

Table of Contents