Oxhark Flame CRYSTAL BEADS 1900EZ-26C Installing

INSTALLING THE CRYSTAL BEADS
STEP 1
-
- Remove the four screws at the corners of glass frame assembly. Lift up and remove the front glass assembly
away from the firebox. Carefully pour the decorative crystal beads onto the tray.
CAUTION: This insert has front panel made of GLASS! ALWAYS use extreme caution when handling glass.
-
Failure to do so could result in personal injury or property damage.
STEP 2
- Replace the glass frame assembly into the unit. Align the screw holes and tighten the four screws in place to
secure the front glass assembly.
1900EZ-26C ELECTRIC FIREPLACE
CRYSTAL BEADS