Making Connections - DigiTech WHAMMY Manual

Making Connections

he Whammy™ pedal is extremely easy to set up and use. Simply follow these steps and you be
Whammin.
. Connect your instrument to the Whammy™ input.
. Connect from the "wet added" output to a your favorite distortion pedal or to your amplifier.
. Connect from the Whammy™ Dry Out to a guitar tuner if desired.
. Connect from the MIDI Out of a MIDI controller to the MIDI In on the Whammy™ if desired.
. Connect the power supply between an AC outlet and the power jack on the Whammy™.
.Turn on you amp and adjust the volume to a desired level.
. Rotate the Preset knob to select the desired effect or interval.
AC Power
Tuner
Dry Out
Wet Added
Distortion Pedal
User's Guide
MIDI Out
MIDI In
Input