Making Connections - DigiTech Bass Whammy Owner's Manual

Making Connections

The Bass Whammy pedal is extremely easy to set up and use. Follow these steps to get up and
running.
1. Connect your instrument to the Bass Whammy's Input Jack.
2. Connect from the Bass Whammy's Output Jack to your favorite distortion pedal or to
your ampli er.
3. If using an external MIDI device for control, connect from the MIDI out of the MIDI
device to the Bass Whammy's MIDI Input.
4. Connect the included power supply to an AC outlet and the other end to the Bass
Whammy's Power Input.
5. Turn on your amp and adjust the volume to the desired level.
6. Use the E ect On/O
select the desired e ect, and rock the Expression pedal.
Footswitch to enable the e ect, rotate the Selector Knob to
OCT 2OCT
OCT 10TH
OCT OCT
OCT 4TH
5TH OCT
5TH 5TH