Midi Keyboard Split Point, Midi Song Utilities - DigiTech VOCALISTWEX Manual

Note: The split
point is only
available for the
single channel
Vocoder modes.
40
To set the Vocoder mode split point:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to Voco.
4. Use the softkeys to select either the above/below or note number
fields. Use the Data Wheel to modify the settings.
5. Press the Utilities button once again to exit; this returns you to the
mode from which you entered.
MIDI Song Utilities
The MIDI Song Utilities allow you to have full MIDI control over the
reception and transmission of Song Selection, Song Mapping, and Song
Steps.
Songs you have created in the Vocalist Workstation EX can be selected
via external MIDI Song Select messages sent from devices capable of
sending them. The front panel of the Vocalist Workstation EX can be
used to send Song Select messages to other devices such as your
sequencer in order to automate song changes during performance.
The MIDI Song Select receive and transmit options are:
¥ off
¥ receive
¥ transmit
¥ receive + transmit
To change the MIDI Song Select receive/transmit
option:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to Song.
4. Use the Data Wheel to select the desired Song Select option.
5. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
The MIDI Song Mapping feature allows you to change the relationship
between incoming Song Select messages and which song is actually
loaded.
Ignore MIDI Song Select messages
Enable external MIDI Song changes
Transmit front-panel Song changes
Receive external and transmit front-
panel Song changes