Naomi Home Landon 20314A Use And Maintenance

N A O M I
H O M E
PART LIST
1 - Seat Base x1
2 - Back Rest x1
3 - Legs x4
4 - Fabric Protector
Washer
Landon Pushback Recliner
1
A
1
A
2
B
7. Close the back fabric
If you need help or have damaged or missing parts, contact customer service at
USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself
loose from time to time depending on the use. Please take the time to
check that all connections are still tight and working properly for safety.
- Only clean using a damp cloth and mild detergent, do not use bleach
or abrasive cleaners.
Assembly Instructions
1. Unpack 1 - Seat Base and turn on
it side. Remove any packing
straps or materials from underside of
Seat Base securing the footrest from opening
2. Select 3 Leg, and
4, fabric protector
washer. Insert leg post
through hole in washer
then into hole in 1 Seat
Base. Facing the leg end,
turn leg clockwise (right)
to tighten leg.
Repeat for 3 other fabric protector
3.
washers and legs.
4. Turn 1 - Seat Base upright
onto the legs.
5. Select 2 - Backrest and open
the back fabric.
2
1
6. Select 1 - Seat Base and 2 - Backrest.
With Backrest fabric facing outward, carefully
align backrest mounts to seat-base mounts.
Insert bottom backrest mounts into Seat Base
Mounts until they latch and backrest is secured
to seat-base. Exercising Caution, Carefully lift
1
upward on the backrest to confirm backrest
A
is secured.
8. Congratulations!
Setup of your new
Naomi Home Landon
Pushback Recliner
is complete!
Note: when seated,
hold the arm rests
and push back with
your torso to recline
4
A
1
A
2
B
www.NaomiHome.com Made in Vietnam
3
A