Rotary Speaker Simulator - DigiTech RP-20 VALVE User Manual

Section - 4 Editing Modules
Out L - R
Pedal Phaser
The Pedal phaser is a phaser that can be controlled by an expression pedal to control the depth and feedback of the effect
Pedal Phaser Parameters
FX and Dry Level
Balance
Pedal
Depth
Feedback
Output A-B
Pan A-B

Rotary Speaker Simulator

The Rotary Speaker Simulator allows you to emulate the classic rotating speaker sound, without the chiropractic problems that come with
moving bulky speaker cabinets. The Rotary speaker is directly responsible for some of the most unique sounds in music. The applications for
this effect are so diverse, it can be used to achieve sounds ranging from the Allman Brothers Band to the legendary Stevie Ray Vaughan.
A unique parameter in the Rotating Speaker simulation is the Acceleration parameter. This parameter is used emulate the the time that it takes
to get the Speaker up and spinning at full speed. The parameter can be assigned to a footswitch or the expression pedal so you can control the
acceleration speed.
Rotary Speaker Simulator Parameters:
FX: Lvl
Dry: Lvl
Balance
Mode
Spread
H - R: Level
40
Controls the output level of the left or right side of the flanger. Ranges from Off to 100%.
Controls the FX and Dry level of the Pedal Phaser module. Ranges from Off to 100%.
Sets the Balance of the effect. Ranges from L 100 to R 100.
This parameter is used to be controlled by the expression pedal to control Depth and Feedback. Range: 0 to 100.
This parameter controls the amount of modulation depth in the phaser. Range is 0 to 100%.
This parameter controls amount of feedback in the phaser effect. Range is 0 to 100%.
This parameter sets output of the pedal phaser effect. Range is from 0 to 100%.
This parameter sets pan of the pedal Phaser Range is from 0 to 100%.
Controls the signal input level fed to the Module. Ranges from Off to 100%.
Controls the level of the dry (uneffected) signal. Ranges from Off to 100%.
Controls the positioning of the dry signal in the stereo soundfield. Ranges from -99 (all left) to 99 (all right)
Selects which speed mode the Rotor and Horn are in. Settings are fast or slow.
Sets the horn stereo microphone spread. Ranges from 0 to 100%.
Sets the overall level of the Rotor or Horn. Ranges from Off to 100%.
RP-20 Valve
User Guide