Download Print this page

Tenergy TLP3000 User Manual

1.5a charger for li-ion/li-polymer battery pack (14.8v 4 cells)

Advertisement

Quick Links

TENERGY
CORPORATION
• Features:
Smart charger for 4-cell 14.8V Li-ion and Li-Polymer battery pack with capacity>1500mAh.
MCU controls the whole charging process to avoid over
Safety protection: over voltage protection, short circuit protection, reverse polarity
protection, over current protection.
Universal 100V- 240V AC input for worldwide power usage.
1500 mA constant charging current.
Automatically stop charging when battery pack is fully charged.
Output connector: Alligator clips.
• Specifications:
Input voltage: 100VAC-240VAC
Rated input current: 1000 mA
Battery type and specification: 4S/14.8V Li-ion/LiPo
Charging current: 1500mA
Charging
voltage:
• Operation
Instructions:
This is an easy-to-use charger. Just connect a battery to the charger, and make sure that the polarity is connected in
the right way. Then connect the charger to AC power outlet.
• LED
Indicator:
Fully charged, and empty load
Green:
Red:
Charging
Flash:
Short circuit
• Warning:
Use special caution when working with Li-ion
characteristics and may explode if
Make sure user has enough knowledge on Li-ion rechargeable batteries in charging, discharging
before use.
Put the batteries in fire-proof environment in charging.
Never leave batteries unattended when charging.
Do not put batteries on car seat, wood surface or carpet when charging
We are not responsible for any damage caused by misusing or mishandling, nor for any damage caused
Li-ion batteries that are not supplied by Tenergy.
Do not make any changes to the
shortage,
fire or over-heating during
Distributed
by Tenergy Corporation
www.tenergy.com
Thank you for using Tenergy 4S/14.8V Li-ion/LiPo Charger!
Please read this manual before using the charger and operate as it instructs
Please DO NOT use this charger with any pack that doesn't have a built-in protection circuit
board/module (PCB/PCM).
Never use it for hobby packs (RC, airsoft, etc.) which are unprotected and are designed to be
balance-charged.
50HZ-60HZ;
16.8V
mishandled.
charger,
charging.
charge.
I Li-polymer cells
and packs,
charger accessories or
connectors,
436 Kato Terrace,
Tel: (510) 687-0388,
they
are very sensitive
as this
might
cause
Fremont, CA94539, USA
Fax:
(510)
687-0328
USER MANUAL
Item NO. 01206-01
.
to charging
and
assembly
by other
electrical

Advertisement

loading
Need help?

Need help?

Do you have a question about the TLP3000 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

01206-01