Cisco 730 Quick Reference Manual

Cisco Headset 730
Turn your headset on and off
Slide the Power/Bluetooth switch on the left ear cup
to the center. To turn your headset off, slide the switch
down.
Pair your headset
Make sure your headset is within 3 feet (1 meter) of
your intended Bluetooth device.
1. Slide up and hold the Power/Bluetooth switch on
the left ear cup to set your headset to pair.
2. In your device settings, select your headset. Your
headset displays as Cisco HS 730 followed by the
last three digits of your headset serial number.
Activate NC and AMB
The Cisco Headset 730 offers two noise control
functions. Noise Cancellation (NC) limits surrounding
ambient noise. Ambient mode (AMB) uses your
headset microphones to enhance your surroundings
and enable you to talk to others around you.
To activate AMB or NC, slide the Noise Cancellation
slider on the right ear cup up or down.
Cisco Headsets
You can customize your headset settings and upgrade
your headset through the Cisco Headsets app.
Download Cisco Headsets to your Apple or Android
mobile device.
L
Presence LED Light
Left buttons and icons
Bluetooth
Power
Call button
Mute
Quick Reference Guide
R
AMB
OFF
NC
Right buttons and icons
AMB
Ambient mode
NC
Noise Cancellation
/
Play button
/
 
Volume control
/
 
Skip a music track
Copyright © 2020 Cisco Systems Inc. All rights reserved.
April 2020