Module
Problem/Inquiry
General
What's in the box?
General
What's the playtime of Motion X500?
Can Motion X500 pair with other speakers, such as the
General
Motion+ / Motion X600 speaker?
General
Can I get stereo sound when using one Motion X500?
General
Does Motion X500 have a microphone?
General
Does Motion X500 support USB playback?
Can I deactivate the power on/off and Bluetooth
General
connection sounds?
General
Is Motion X500 waterproof?
General
How long does it take to charge Motion X500?
General
How do I reset Motion X500?
soundcore Motion X500 FAQ
Troubleshooting/Answer
Motion X500 Speaker
60 cm USB-C to C Cable
Safety Card&Quick Start Guide
Note: Wall charger not included
Motion X500 supports up to 12 hours of playtime.
Note: The 12-hour battery life is based on measurements taken at 50% volume and with
BassUp turned off. The actual battery life may vary depending on factors such as the type of
content being played, custom EQ settings, and volume level.
No, it cannot pair with the Motion+ / Motion X600 or other model speakers. However, the
Motion X500 can pair with another Motion X500 speaker via TWS.
Yes. The left side plays left channel, and the right side plays right channel.
Yes.
No.
Yes, you can deactivate the power on/off and Bluetooth connection sounds. Just connect X500
to the soundcore app, and turn off these sounds in the X500's setup interface.
Motion X500 is IPX7 waterproof, but before submerging it in water, it is necessary to ensure
that the waterproof cover on the back is securely fastened.
It takes around 5 hours to charge with a certified 5V/3A (15W) wall charger.
Turn on the speaker then hold down the Bluetooth and Volume + buttons for 5-10 seconds.
You'll hear a prompt, and the speaker will automatically restart.
Need help?
Do you have a question about the Motion X500 and is the answer not in the manual?
Questions and answers