Electrohome RR75 Quick Start Manual

TURNTABLE QUICK START GUIDE
RR75
PRODUCT INFORMATION
1
2
3
4
POWER ON FOR FIRST TIME
1. Plug in the unit and set the rear Power Switch to ON
ON
ON
OFF
OFF
PLAYING A RECORD
1. Plug in the unit and set to Phono function
2. Ensure the Transit Screw is fully down for playback
3. Place a record on the Platter. If playing a 7" record place the
45 Adapter on the Spindle in the center of the Platter
4. Ensure the Speed Selector is set to the proper speed (33, 45,
or 78)
5. Remove the plastic stylus protector from the end of the
Tonearm
Questions? Give us a chance to help, we're just a click away.
Electrohome.com/resources
Electrohome.com/videos
1.1
v
5
6
7
8
9
2. Press the Standby Knob to turn on the unit
STANDBY
6. Unlock the Tonearm Lock and Raise the Tonearm
using the Cueing Lever
7. Position the Needle over the edge of the record
8. Lower the Tonearm using the Cueing Lever
9. The Turntable will stop spinning at end of album
NOTE: Always lock Tonearm when record player is not in use
Electrohome.com/support
Electrohome.com/contact
1. Transit Screw
2. 45 Adapter
3. Platter
4. Spindle
5. Cueing Lever
6. Tonearm Lock
7. Speed Selector (33/45/78 RPM)
8. Tonearm
9. Stylus
IMPORTANT
Before playing, please remove packaging foam on top
of the Turntable. Then use a screwdriver to turn the
Transit Screw in a clockwise direction until the screw is
fully down to unlock the Turntable
PRESS TO TURN ON