Apromise GL0004 Installation Instructions

Glass Wind Guard Installation Instructions
Packing Contents-Part List:
2x Short Glass Panels
4x Top Corner Brackets with set screws
4X Bottom Corner Brackets with set screws
Tools Needed:
Phillips Screwdriver (Hand tools ONLY, do NOT use power tools for
assembly)
Soft leather gloves for handling glass panels
Before you begin:
Before assembly, make sure all parts are present. Carefully remove the wind
guard from the packaging and inspect for any damage such as chips or cracks. Place
glass panels on a surface, grouped together by type of part and compare parts
received If any part is missing or damaged, do NOT att empt to assemble the product.
Please read and understand this entire installation instructions before attempting to assemble,
operate or install this product. If you have any questions regarding the product, please contact
customerservice.
(For Model:GL0004)
2x Long Glass Panels
4x Straight Brackets with set screws
4x Round Middle Brackets with set screws
1 / 2
TM