Hotpoint RLA30 Instructions For Installation And Use Manual
Hotpoint RLA30 Instructions For Installation And Use Manual

Hotpoint RLA30 Instructions For Installation And Use Manual

Hotpoint larder fridge instructions for installation and use

Advertisement

LARDER FRIDGE - MODELS RLA30, RLM30, RLS30, RLA32
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
STEP 1
Choose a location for your
fridge, away from any
heat sources and
allow adequate
ventilation - 30mm
(1
/
inch) gap above.
1
4
STEP 3
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
STEP 5
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
To ensure that your fridge runs reliably and efficiently follow these steps.
Keep this Book in a safe place for quick reference.
STEP 2
Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
STEP 4
Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
STEP 6
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
Troubleshooting section.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RLA30 and is the answer not in the manual?

Questions and answers

Table of Contents