OTC 6024 Operating Instructions

Applications: 1993 & newer 4.2L, 4.6L two valve; 4.6L four valve; and 5.4L and 6.8L V-8 engines
CAUTION: To prevent damage to valves and
pistons, DO NOT rotate the crankshaft and/or
camshaft(s) when removing the timing chain(s) and
installing the cylinder heads. Because this is not a free-
wheeling engine, if it has "jumped time" there will be damage
to the valves and/or pistons, which will require the removal of
the cylinder heads.
1. Install crankshaft positioning tool No. 6024 (same
as Ford No. 303-448) over crankshaft and engine front
cover alignment dowel. This will position the crankshaft
at top dead center for correct timing chain installation.
© Bosch Automotive Service Solutions LLC
Applications: 1993 & newer 4.2L, 4.6L two valve; 4.6L four valve; and 5.4L and 6.8L V-8 engines
CAUTION: To prevent damage to valves and
pistons, DO NOT rotate the crankshaft and/or
camshaft(s) when removing the timing chain(s) and
installing the cylinder heads. Because this is not a free-
wheeling engine, if it has "jumped time" there will be damage
to the valves and/or pistons, which will require the removal of
the cylinder heads.
1. Install crankshaft positioning tool No. 6024 (same
as Ford No. 303-448) over crankshaft and engine front
cover alignment dowel. This will position the crankshaft
at top dead center for correct timing chain installation.
© Bosch Automotive Service Solutions LLC
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Ford Crankshaft Positioning Tool
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
Ford Crankshaft Positioning Tool
Operating Instructions
for:
Install tool over front
cover alignment
dowel.
Align crankshaft woodruff
key with keyway on tool.
Operating Instructions
for:
Install tool over front
cover alignment
dowel.
Align crankshaft woodruff
key with keyway on tool.
Form No. 106210
6024
No. 6024
Rev B, August 7, 2014
Form No. 106210
6024
No. 6024
Rev B, August 7, 2014