Advertisement
655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7223
Fax: (507) 455-7063
The OTC Heavy-Duty Clutch Handler and Flywheel Adapter are designed for the removal and installation
of the 14" and 15-1/2" double disc clutches and/or flywheel assemblies found on many heavy-duty vehicles.
Refer to Form No. 105665 for instructions about using the flywheel adapter (OTC No. 218174).
5, 36, 7, 8, 9, 10, 37
3
1, 2
35
© Bosch Automotive Service Solutions Inc.
Clutch Handler
Max. Capacity: 150 lbs.
14, 7
13
6, 11, 12
4
34
31,
32,
36,
36,
33
30,
30,
37
37
36,
37
Parts List &
Operating Instructions
for:
Heavy-Duty
Parts List
17, 18
15
5
19
5,
7,
9,
Form No. 545622
16
20
21
22, 23, 24
25
26, 27, 28
29, 27, 28
Sheet No.
1 of 3
Issue Date:
Rev. C, April 3, 2019
5015A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OTC 5015A
Summary of Contents for OTC 5015A
- Page 1 Clutch Handler Max. Capacity: 150 lbs. The OTC Heavy-Duty Clutch Handler and Flywheel Adapter are designed for the removal and installation of the 14" and 15-1/2" double disc clutches and/or flywheel assemblies found on many heavy-duty vehicles. Refer to Form No. 105665 for instructions about using the flywheel adapter (OTC No. 218174).
- Page 2 Refer to any operating instructions included with the product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected by OTC. Therefore: Use only OTC replacement parts!
-
Page 3: Safety Precautions
Parts List & Operating Instructions Form No. 545622 Safety Precautions CAUTION: To prevent personal injury and/or damage to the equipment, • Study, understand, and follow all instructions before operating this clutch handler. • Wear eye protection that meets ANSI Z87.1 and OSHA standards. •... - Page 4 Parts List & Operating Instructions Form No. 545622, Sheet 2 of 3, Back Operating Instructions Clutch Removal 1. Attach the correct splined input shaft (2" or the optional 1-3/4" diameter) to the clutch handler. 2. Sparingly apply lubricant to the area of the splined input shaft shown in Figure 1.
- Page 5 Parts List & Operating Instructions Form No. 545622 14" Clutch Installation 1. Sparingly apply lubricant to the area of the input shaft shown in Figure 1. 2. Place the new front clutch disc and intermediate plate into the pot type flywheel. See Figure 5. 3.
Need help?
Do you have a question about the 5015A and is the answer not in the manual?
Questions and answers