Dynacord POWERMATE 600 Specifications page 2
Power mixer
Hide thumbs
Also See for POWERMATE 600:
- Owner's manual (64 pages) ,
- Brochure & specs (4 pages) ,
- Quick start (4 pages)
Advertisement
SPECIFICATIONS
Technical Specifications PowerMate600 Mixing desk in rated condition, Unity Gain (MIC Gain 20 dB), all faders
position 0 dB,
all pots in mid position, master fader + 6dB, amplifier rated output power into 8 Ohms, dual channel, unless
otherwise specified.
Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel
into 4 Ohms
into 8 Ohms
Rated Output Power, THD=0.1%, Single Channel
into 4 Ohms
into 8 Ohms
Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel
into 4 Ohms
into 8 Ohms
Maximum Output Voltage of power amplifier, no load
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical
Power amplifier input to Speaker L/R output
DIM 30, power amplifier
IMD-SMPTE, power amplifier, 60Hz, 7 kHz
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output
Any input to Speaker L/R output
Crosstalk, 1kHz
Fader and AUX-Send attenuation
Channel to channel
CMRR, MIC input, 1kHz
Input Sensitivity, all level controls in max. position
MIC input
LINE Input (Mono)
LINE Input (Stereo)
Power Amplifier Input
Maximum Level, mixing desk
MIC inputs
Mono Line inputs
Stereo Line inputs
All other inputs
Record Send output
All other outputs
Input Impedances
MIC
Insert Return
EQ Input and 2 Track Return
All other inputs
Output Impedances
Record Send
Phones
All other outputs
Equivalent Input Noise, MIC Input, A-weighted, 150 Ohms
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down
Master fader 0 dB, Channel fader down
Master fader 0 dB, Channel fader 0 dB, Channel gain unity
Signal/Noise-Ratio, power amplifier, A-weighted
Equalization
LO Shelving
MID Peaking, mono inputs
MID Peaking, stereo inputs
HI Shelving
Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz
Power Consumption at 1/8 maximum output power, 4 Ohms
Dimensions, (WxHxD), mm
Weight, without lid
Optional
RMK-600 (Rack-Mount-Kit PowerMate600)
FS11 (Footswitch)
2 x 270 W
2 x 180 W
2 x 300 W
2 x 150 W
2 x 340 W
2 x 200 W
43 Vrms
< 0.006%
< 0.08%
< 0.03%
< 0.2%
15Hz ... 60kHz
30Hz ... 40kHz
> 80 dB
> 70 dB
> 80 dB
-74 dBu (155 µV)
-54 dBu (1.55 mV)
-34 dBu (15.5 mV)
+6 dBu (1.55 V)
+ 11 dBu
+ 30 dBu
+ 20 dBu
+ 20 dBu
+ 14 dBu
+ 20 dBu
1.8 kOhms
10 kOhms
15 kOhms
> 15 kOhms
1 kOhm
47 Ohms
75 Ohms
-130 dBu
-90 dBu
-89 dBu
-83 dBu
105 dB
± 15 dB / 60 Hz
± 15 dB / 2.4 kHz
± 15 dB / 2.4 kHz
± 15 dB / 12 kHz
± 10 dB
450 W
461.5 x 176.5 x 366.5
13kg
112 741
110 693
Advertisement
