FiberHome HG6145F3 Product Manual
  1. Manuals
  2. Brands
  3. FiberHome Manuals
  4. Touch terminals
  5. HG6145F3
  6. Product manual
FiberHome HG6145F3 Product Manual

FiberHome HG6145F3 Product Manual

Gpon optical network terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HG6145F3
GPON Optical Network Terminal
Product Manual
Version: A
FiberHome Telecommunication Technologies Co., Ltd.
October 2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HG6145F3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for FiberHome HG6145F3

Summary of Contents for FiberHome HG6145F3

  • Page 1 HG6145F3 GPON Optical Network Terminal Product Manual Version: A FiberHome Telecommunication Technologies Co., Ltd. October 2022...

  • Page 3: Trademarks And Permissions

    The purchased products, services or features shall be subject to the commercial contracts made between FiberHome and the customer. All or part of the products, services or features described in this document may not be within the purchase or usage scope.

  • Page 4: Safety Precautions

    Safety Precautions For your correct and safe operations on the equipment, please carefully read and strictly observe the following safety instructions: High optical power can cause bodily harm, especially to eyes. Never look directly into the end of the optical transmitter fiber jumper or the end of its active connector. Exercise care if you must bend fibers.

  • Page 5: Table Of Contents

    2.3.2 LAN Interface ..............4 2.3.3 POTS Interface..............4 2.3.4 Wi-Fi Interface..............4 2.3.5 USB Interface ..............5 Introduction to the HG6145F3 ............5 2.4.1 Appearance............... 5 2.4.2 Product Characteristics............. 9 2.4.3 Functions and Features ........... 11 2.4.4 Technical Specifications ..........15 Web Configuration Guide................
  • Page 6 3.3.4 Remote Management ............42 3.3.5 Authentication Settings ........... 43 3.3.6 Voice Configuration............44 3.3.7 Route Settings..............50 Security..................51 3.4.1 Firewall ................51 3.4.2 Dynamic DoS..............64 3.4.3 HTTPS ................64 Application..................65 3.5.1 VPN................. 65 3.5.2 DDNS ................66 3.5.3 Port Mapping ..............
  • Page 7 4.10 Test of Voice Service Failed ............84 Standards and Protocols ................86 Appendix A Abbreviations ................89...

  • Page 9: Preface

    Preface HG6145F3 Product Manual introduces the positioning, features, functions and technical specifications of the HG6145F3 as well as web configurations and handling of common problems, so that readers can have an overall idea about the product. Intended readers for this manual are marketing personnel, commissioning engineers, and operation and maintenance engineers.

  • Page 10: Product Introduction

    See Figure 2-1 for the network positioning of the HG6145F3. Figure 2-1 Network Application of the HG6145F3 Product Specifications The tables below list the interfaces on the HG6145F3 and the services supported by the ONT for users' reference on ONT configuration. Version: A...

  • Page 11: Interface Specifications

    Internet Service Multicast Service Voice Service Wi-Fi Service HG6145F3 Note: indicates supported ; × indicates not supported . Service Reliability The HG6145F3 supports MTBF up to 50 000 hours. Interface Specifications 2.3.1 2.3.1 GPON Interface Table 2-3 GPON Interface Specifications Specification...

  • Page 12: Lan Interface

    HG6145F3 GPON Optical Network Terminal Product Manual 2.3.2 2.3.2 LAN Interface Table 2-4 LAN Interface Specifications Specification Parameter Standard compliance IEEE 802.3ab Interface type RJ-45 10 Mbit/s, 100 Mbit/s or 1000 Mbit/s Interface rate Maximum transmission distance 100 m Supports full-duplex or half-duplex and 10/100/1000 M Working mode auto negotiation.

  • Page 13: Usb Interface

    20 MB/s Introduction to the HG6145F3 2.4.1 2.4.1 Appearance The following describes the appearance of the HG6145F3, including the overall look, interfaces, buttons, and indicator LEDs. Note: The pictures here are only for reference. Appearance The overall appearance of the HG6145F3 is shown in Figure 2-2.
  • Page 14 Overall Outlook of the HG6145F3 Interface and Button Interfaces and buttons of the HG6145F3 are located on the rear, side and bottom panels of the equipment. Figure 2-3, Figure 2-4 and Figure 2-5 show the rear panel, side panel and bottom panel respectively.
  • Page 15 Product Introduction Figure 2-4 Side Panel of the HG6145F3 Figure 2-5 Bottom Panel of the HG6145F3 Table 2-8 describes the interfaces and buttons on the HG6145F3. Version A...

  • Page 16: Indicator Led Description

    Enables or disables 2.4G/5G WLAN. button Connects with optical fiber for uplink access. Fiber interface Indicator LED Description Indicator LEDs of the HG6145F3 are located on the front panel of the equipment. Table 2-9 Indicator LEDs on the HG6145F3 Meaning Status Description...

  • Page 17: Product Characteristics

    2.4.2 2.4.2 Product Characteristics The HG6145F3 can be used together with the OLT equipment to make up a GPON system and access multiple services for users. The HG6145F3 has the following characteristics: GPON access capability Conforms to ITU-T G.984 series of standards, with good interoperability.

  • Page 18: Gateway Function

    HG6145F3 GPON Optical Network Terminal Product Manual Wi-Fi wireless access The equipment provides Wi-Fi wireless access based on IEEE 802.11 a/b/g/n/ac/ax to set up safe and reliable wireless network for users. Compatible with IEEE 802.11 a/b/g/n/ac/ax and passed Wi-Fi Alliance authentication, with good compatibility with other WLAN devices.

  • Page 19: Functions And Features

    2.4.3 2.4.3 Functions and Features Table 2-10 Functions and Features of the HG6145F3 Description Item Compliant with standards ITU-T G.984.1, G.984.2, G.984.3 and G.984.4. Supports GEM encapsulation (Ethernet over GEM is supported, but ATM encapsulation is not supported).
  • Page 20 HG6145F3 GPON Optical Network Terminal Product Manual Table 2-10 Functions and Features of the HG6145F3 (Continued) Description Item Supports encryption of downlink unicast data channel. Supports the AES-128 encryption algorithm. Encryption Supports generation of the key and response to the OLT's request for key.
  • Page 21 Product Introduction Table 2-10 Functions and Features of the HG6145F3 (Continued) Description Item Supports the IPv6 Snooping multicast service, supports the MLDv1 information, MLDv2 query information and MLDv2 report information. Supports the IEEE 802.1Q VLAN standard. Supports joining the 802.1Q VLAN in the tag / untag mode.
  • Page 22 HG6145F3 GPON Optical Network Terminal Product Manual Table 2-10 Functions and Features of the HG6145F3 (Continued) Description Item Supports the WPS negotiation encryption algorithm and key. Supports adjustment of the transmit power. Complaint with the USB 3.0/USB 2.0 standard. Supports plug-and-play and hot insertion of the USB storage device.

  • Page 23: Technical Specifications

    Product Introduction 2.4.4 2.4.4 Technical Specifications Table 2-11 Technical Specifications of the HG6145F3 Description Classification Item 43 mm × 185 mm × 135.2 mm (H × W × D) Dimensions Mechanical parameters Weight About 545 g Power supply parameter DC 12 V/1.5 A Typical power 9.66 W...

  • Page 24: Web Configuration Guide

    Web Configuration Guide This chapter introduces the Web page for the HG6145F3 administrator, including the parameter meanings and operation methods. Note: Configure the ONT on the OLT via the access network management system. For details, please refer to the relevant OLT configuration guide.

  • Page 25: Operation Procedure

    Web Configuration Guide Table 3-1 Planning Data for Local Login to the Web Page Description Item Factory default value: Administrator Username: admin Password: %0|F?H@f!berhO3e Common user Username: user Username and password Password: user1234 Note: Some operators require customized username and password, so that the default username and password may be different from the ones mentioned above.
  • Page 26 HG6145F3 GPON Optical Network Terminal Product Manual Enter the administrator username and password in the login dialog box. Access the Web page after the password is authenticated. Caution: The system will log out automatically if no user operation is detected in five minutes.

  • Page 27: Status

    Web Configuration Guide The common users can view and configure only part of the node items. The following lists the key nodes available for common users. For details of the configuration items, please refer to the practical pages. The Status tab. WLAN Settings in the Network tab.

  • Page 28: Wireless Network Status

    HG6145F3 GPON Optical Network Terminal Product Manual 3.2.2 3.2.2 Wireless Network Status View the information about the wireless network, such as network mode, frequency channel, SSID, count of wireless packets, and list of Wi-Fi clients. 3.2.2.1 3.2.2.1 Wireless Network Status...
  • Page 29 Web Configuration Guide Figure 3-4 Status of the 5G Wireless Network 3.2.2.3 3.2.2.3 Wi-Fi User List Select Status in the navigation bar, and then select Wireless Status WIFI Clients List in the left link bar to view the list of client ends connected to the ONT wireless network, as shown in Figure 3-5.

  • Page 30: Wan Side Status

    HG6145F3 GPON Optical Network Terminal Product Manual 3.2.3 3.2.3 WAN Side Status Select Status in the navigation bar, and then select WAN Status WAN Status in the left link bar to view the information such as the status, IP obtaining mode, IP address and subnet mask of the WAN interface, as shown in Figure 3-6.

  • Page 31: Ethernet Ports

    Web Configuration Guide 3.2.4.2 3.2.4.2 Ethernet Ports Select Status in the navigation bar and select LAN Status Ethernet Ports in the left link bar to view the information such as the LAN port, LAN mode, LAN speed, LAN state, transmit bytes, etc. See Figure 3-8. Figure 3-8 Ethernet Ports 3.2.4.3...

  • Page 32: Voice Status

    HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-10 Optical Power Status 3.2.6 3.2.6 Voice Status Select Status in the navigation bar and select VoIP Status VoIP Status in the left link bar to view the information such as the port status and telephone number, as shown in Figure 3-11.

  • Page 33: Band Steering

    Web Configuration Guide 3.3.1.1 3.3.1.1 Band Steering Configure the parameters relevant to the band steering. Setting up the wireless security and encryption can prevent any unauthorized access and monitoring. Select Network in the navigation bar and select WLAN Settings BandSteering in the left link bar to open the band steering page, as shown in Figure 3-12.
  • Page 34 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-2 Parameters for Band Steering Configuration (Continued) Description Item The authentication mode of the wireless terminal requesting to access the wireless network. The options include OpenSystem, WPA-PSK/WPA2-PSK, WPA2-PSK, WPA3-SAE and WPA2-PSK/WPA3-SAE. OpenSystem: Unencrypted. Any terminal can access to the wireless network, so that the security cannot be guaranteed.
  • Page 35 Web Configuration Guide Figure 3-13 Basic Parameters of the Wireless Network Configure the basic parameters of the 2.4G wireless network. For details of the parameters, see Table 3-3. Click Apply to save and apply the configuration. Table 3-3 Basic Parameters of the 2.4G Wireless Network Description Item Enables or disables the WLAN service.
  • Page 36 HG6145F3 GPON Optical Network Terminal Product Manual 3.3.1.3 3.3.1.3 2.4G Advanced Configuration Configure the parameters of the 2.4G wireless network, such as the SSID, password, security mode and algorithm. Select Network in the navigation bar, and then select WLAN Settings 2.4G Advanced in the left link bar to open the advanced setting page for the 2.4G wireless...
  • Page 37 Web Configuration Guide Table 3-4 Advanced Setting Parameters of Wireless Network (Continued) Description Item The authentication mode of the wireless terminal requesting to access the wireless network. The options include OpenSystem, WPA-PSK/WPA2-PSK, WPA2-PSK, WPA3-SAE and WPA2-PSK/WPA3-SAE. OpenSystem: Unencrypted. Any terminal can access to the wireless network, so that the security cannot be guaranteed.

  • Page 38: Basic Parameters

    HG6145F3 GPON Optical Network Terminal Product Manual 3.3.1.4 3.3.1.4 2.4G Wi-Fi Control Configure parameters of the 2.4G wireless network, such as Wi-Fi power and number of WIFI connections. Select Network in the navigation bar, and then select WLAN Settings 2.4G WIFI Control in the left link bar to open the WIFI control setting page for the 2.4G wireless...
  • Page 39 Web Configuration Guide Select Network in the navigation bar and select WLAN Settings 5G Basic in the left link bar to open the basic setting page for the 5G wireless access service, as shown in Figure 3-16. Figure 3-16 Basic Parameters of the 5G Wireless Network Configure the basic parameters of the 5G wireless network.

  • Page 40: Advanced Configuration

    HG6145F3 GPON Optical Network Terminal Product Manual 3.3.1.6 3.3.1.6 5G Advanced Configuration Configure the parameters of the 5G wireless network, such as the SSID, password, security mode and algorithm. Select Network in the navigation bar and select WLAN Settings 5G Advanced in the left link bar to open the advanced setting page for the 5G wireless access service, as shown in Figure 3-17.

  • Page 41: Wps Configuration

    WPS can automatically set the wireless network name (SSID) and wireless encryption key for the HG6145F3 and client end supporting the Wi-Fi service. You need only to press down the WPS button or enter the PIN to achieve safe connection. Since you need not remember the long encryption key, you are free of the trouble caused by forgetting the password.

  • Page 42: Lan Settings

    HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-19 WPS Configuration Select 2.4G/5G WPS Band. Select whether to enable the WPS function. The options include Enable and Disable. Select the WPS connection mode as required. Select PIN code(PIN), and enter the PIN code of the client end in the text box.
  • Page 43 Web Configuration Guide Figure 3-20 LAN Settings Configure the management IP address and subnet mask at the LAN side. For details of the parameters, see Table 3-7. Click Apply to save and apply the configuration. Table 3-7 Parameters of LAN Settings Item Description The management IP address at the LAN side of the ONT.
  • Page 44 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-7 Parameters of LAN Settings (Continued) Item Description The IPv6 gateway address, including a prefix of 64 bits. The default IPv6/Prefix value is fe80::1/64. Select whether to distribute the IPv6 address based on DHCP. The Managed Flag default value is Disable.
  • Page 45 Web Configuration Guide Table 3-7 Parameters of LAN Settings (Continued) Item Description DHCP Subnet The mask of the active DHCP server. Mask DHCP Primary The IP address of the active DNS server. DHCP The IP address of the standby DNS server. Secondary DNS DHCP Default The default gateway of the active DHCP server.

  • Page 46: Broadband Settings

    HG6145F3 GPON Optical Network Terminal Product Manual Table 3-8 Parameters of DHCP Static IP Settings Description Item The MAC address of the user device subject to the DHCP filtering rule. MAC Address IP Address The IP address for the DHCP server.
  • Page 47 Web Configuration Guide Configure parameters relevant to the Internet at the WAN side. For details of the parameters, see Table 3-9. Click Apply to save and apply the configuration. Table 3-9 Parameters for Internet Settings Description Item Select the WAN port service type. TR069: This connection is only applicable for TR069 service.
  • Page 48 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-9 Parameters for Internet Settings (Continued) Description Item 5G SSID Select the wireless 5G SSID to be bound with the WAN port. Binding Users need to configure this item when the service type is set to INTERNET, TR069_ The options include IPv4&IPv6, IPv4 and IPv6.

  • Page 49: Iptv Settings

    Web Configuration Guide Table 3-9 Parameters for Internet Settings (Continued) Description Item Prefix Sets whether to enable the prefix obtainment Obtainment function. Address These items should be set Select the IPv6 address obtaining method. Obtainment when the IP Mode is set to Method IPv4&IPv6 or IPv6.

  • Page 50: Remote Management

    HG6145F3 GPON Optical Network Terminal Product Manual Click Apply to save and apply the configuration. 3.3.4 3.3.4 Remote Management Configure the parameters relevant to the ACS server. Select Network in the navigation bar and select Remote Management ACS Server in the left link bar to open the ACS server page, as shown in Figure 3-24.

  • Page 51: Authentication Settings

    Web Configuration Guide Table 3-10 Parameters for ACS Server (Continued) Description Item Connection Request Password Enter the requested connection password. Enables or disables the inform function. When enabled, the device periodically communicates with the ACS server, automatic Inform Enable reporting inform information. Set the inform interval, the default value is 43200.

  • Page 52: Voice Configuration

    HG6145F3 GPON Optical Network Terminal Product Manual Table 3-11 Parameters for OLT Authentication Description Item LOID Username for LOID authentication. These items are configurable when the ONT uses the LOID Logic Password Password for LOID authentication. authentication mode. Sets the authentication password when the ONT is authenticated by password.
  • Page 53 Web Configuration Guide Table 3-12 Key Parameters for Voice Service Description Item The voice protocol type. The default setting is SIP. VoIP Protocol Enable or disable the VoIP port. Port1 3.3.6.2 3.3.6.2 Basic Parameters Configure basic voice parameters. Select Network in the navigation bar and select VoIP Settings Basic from the link bar on the left side to open the VoIP basic parameter configuration page, as shown in Figure 3-27.
  • Page 54 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-13 Basic Parameters for Voice Service (Continued) Description Item Telephone Number The telephone number for the voice port. The IP address or domain name of the active register server. The port First Register Server number range is 1025 to 65535, and the default setting is 5060.
  • Page 55 Web Configuration Guide Figure 3-28 Advanced Voice Configuration Configure the advanced VoIP parameters as required. For details of the parameters, see Table 3-14. Click Apply to save and apply the configuration. Table 3-14 Advanced Parameters for Voice Service Description Item RFC2833 PT Default PT value in RFC2833.
  • Page 56 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-14 Advanced Parameters for Voice Service (Continued) Description Item Character Escape The options include Escape and Not Escape. The default value is Escape. Mode The Caller ID display mode. The options include From and P-Asserted-id. The Caller-ID Head default setting is P-Asserted-id.
  • Page 57 Web Configuration Guide Figure 3-29 Digitmap and Time Length Configure VoIP time length parameters. For details of the parameters, see Table 3-15. Click Apply to save and apply the configuration. Table 3-15 Parameters of Digitmap and Time Length Description Item The digitmap matching mode.
  • Page 58 HG6145F3 GPON Optical Network Terminal Product Manual Table 3-15 Parameters of Digitmap and Time Length (Continued) Description Item The interval for retransmission of registration information. The value range is 30 Retransmission to 3600 (s), and the default setting is 30.

  • Page 59: Route Settings

    Web Configuration Guide Table 3-16 Coding Parameters Description Item The coding mode. The options include G.711MuLaw, G.711ALaw, G.723.1, G. Mode 729 and G.722. Packetization The RTP packetization period. The value range is 10 to 60 (ms). Period 3.3.7 3.3.7 Route Settings The following introduces how to configure the IPv4 default route and IPv4 static route.

  • Page 60: Security

    HG6145F3 GPON Optical Network Terminal Product Manual Select Network in the navigation bar and select Route Settings IPv4 Static Route in the left link bar. Click Add to open the IPv4 static route configuration page, as shown in Figure 3-32.

  • Page 61: Firewall

    Web Configuration Guide 3.4.1 3.4.1 Firewall The firewall configuration includes Firewall Control IPv4 Filtering IPv6 Filtering DHCP Filtering URL Filtering Anti Port Scan MAC Filtering IPv6 MAC Filtering ACL Settings IPv6 ACL Settings 3.4.1.1 3.4.1.1 Firewall Control Enabling the firewall can prevent malicious access to the WAN port of the ONT. Select Security in the navigation bar and select Firewall Firewall Control in the left link bar to open the firewall enabling page, as shown in Figure 3-33.
  • Page 62 HG6145F3 GPON Optical Network Terminal Product Manual 3.4.1.2 3.4.1.2 IPv4 Filtering Allow or forbid the incoming or outgoing flow of the IP packets meeting the filtering criteria. After the firewall is enabled, the pre-set rules will take effect. Select Security in the navigation bar and select Firewall IPv4 Filtering in the left link bar.
  • Page 63 Web Configuration Guide Table 3-18 Parameters for IP Address Filtering Description Item Select the filtering mode. White List indicates that the data complying with the Click the Apply rules in the filtering rule table will be allowed to pass. button below to Filter Mode Black List indicates that the data complying with the apply the settings.
  • Page 64 HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-35 IPv6 Filtering Configure the parameters relevant to filtering as required. For details of the parameters, see Table 3-19. Click Apply to save and apply the configuration. Table 3-19 Parameters of IPv6 Filtering...

  • Page 65: Dhcp Filtering

    Web Configuration Guide Table 3-19 Parameters of IPv6 Filtering (Continued) Description Item Enter the IPv6 address at the LAN side if the direction is set to LAN->WAN. Src IPv6 Enter the IPv6 address at the WAN side if the direction is set to WAN->LAN. The port range of the source IP address.

  • Page 66: Url Filtering

    HG6145F3 GPON Optical Network Terminal Product Manual Click Apply to save and apply the configuration. Table 3-20 Parameters for DHCP Filtering Description Item DHCP Filtering Enables or disables the DHCP filtering. Enable Select the filtering mode. The white list and black list...
  • Page 67 Web Configuration Guide Figure 3-37 URL Filtering Configure the parameters relevant to filtering as required. For details of the parameters, see Table 3-21. Click Apply to save and apply the configuration. Table 3-21 Parameters for URL Filtering Parameters Description Item Enables or disables the URL filtering function.

  • Page 68: Mac Address Filtering

    HG6145F3 GPON Optical Network Terminal Product Manual 3.4.1.6 3.4.1.6 Anti Port Scan Enable or disable the anti port scan function. Select Security in the navigation bar and select Firewall Anti Port Scan in the left link bar to open the anti port scan page, as shown in Figure 3-38.
  • Page 69 Web Configuration Guide Figure 3-39 MAC Address Filtering Configure parameters relevant to filtering as required. For details of the parameters, see Table 3-22. Click Apply to save and apply the configuration. Table 3-22 Parameters for MAC Address Filtering Description Item MAC Filtering Enables or disables the MAC address filtering function.
  • Page 70 HG6145F3 GPON Optical Network Terminal Product Manual 3.4.1.8 3.4.1.8 IPv6 MAC Filtering One user device may have multiple IPv6 addresses but only one MAC address. The user device access authority in the LAN can be controlled effectively by setting the MAC address filtering.

  • Page 71: Acl Settings

    Web Configuration Guide Table 3-23 Parameters for IPv6 MAC Address Filtering (Continued) Description Item Select the filtering mode. The white list and black list modes are configured globally and cannot be enabled simultaneously. White List indicates that the data complying with the IPv6 MAC rules defined in the filtering table will be allowed to Filtering Blacklist...
  • Page 72 HG6145F3 GPON Optical Network Terminal Product Manual Configure the parameters relevant to ACL as required. Table 3-24 describes the parameters. Click Apply to save and apply the configuration. Table 3-24 Parameters for ACL Settings Description Item Enables or disables the ACL function. After setting, click Apply ACL Enable below so that the setting can take effect.

  • Page 73: Dynamic Dos

    Web Configuration Guide Configure the parameters relevant to IPv6 ACL as required. Table 3-25 describes the parameters. Click Apply to save and apply the configuration. Table 3-25 Parameters for IPv6 ACL Settings Description Item Enables or disables the IPv6 ACL function. After setting, click IPv6 ACL Enable Apply below so that the setting can take effect.

  • Page 74: Https

    HG6145F3 GPON Optical Network Terminal Product Manual Click Apply to save and apply the configuration. 3.4.3 3.4.3 HTTPS The ONT provides the HTTPS function. HTTPS is the HTTP channel for security purpose. It is built on the SSL+HTTP protocol, and can perform encryption transmission and identity authentication.

  • Page 75: Ddns

    Web Configuration Guide Select Application in the navigation bar and select VPN VPN Passthrough in the left link bar to open the page for configuring the VPN transparent transmission, as shown in Figure 3-45. Figure 3-45 VPN Transparent Transmission Configure the parameters IPSec Passthrough and PPTP Passthrough enabled or disabled as required.

  • Page 76: Port Mapping

    HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-46 DDNS Settings Configure parameters relevant to DDNS according to the requirement. For details of the parameters, see Table 3-26. Click Apply to save and apply the configuration. Table 3-26 Parameters for DDNS Settings...
  • Page 77 Web Configuration Guide Select Application in the navigation bar and select Port Mapping Port Mapping in the left link bar. Then click Add to open the port mapping configuration page, as shown in Figure 3-47. Figure 3-47 Port Mapping Configure parameters relevant to port mapping according to the requirement. For details of the parameters, see Table 3-27.

  • Page 78: Nat

    HG6145F3 GPON Optical Network Terminal Product Manual 3.5.4 3.5.4 NAT allows the conversion between intranet IP addresses and public network IP addresses. NAT converts a great number of intranet IP addresses into one or a small number of public network IP addresses, so as to save the resource of public network IP addresses.

  • Page 79: Upnp

    Web Configuration Guide Table 3-28 Parameters for NAT Configuration (Continued) Description Item Select the NAT conversion mode. It is advisable to select One-to-One or Rule Type Many-to-One. The starting IP address of the intranet. Local Start IP The ending IP address of the intranet. Local End IP The starting IP address of the public network.

  • Page 80: Dmz

    HG6145F3 GPON Optical Network Terminal Product Manual 3.5.6 3.5.6 When the ONT is working in the routing mode, enable the DMZ function if a host at the WAN side needs to access a certain host at the LAN side. The ONT will forward all the IP packets from the WAN to the designated DMZ host.

  • Page 81: Network Diagnosis

    Web Configuration Guide Figure 3-51 Web Port Configure relevant parameters according to the requirement. Table 3-30 describes the parameters. Click Apply to save and apply the configuration. Table 3-30 Parameters for Web Port Configuration Description Item WEB Valid The current valid web communication port. Communication Port WEB Communication The modified web communication port.
  • Page 82 HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-52 Ping Diagnosis Configure relevant parameters according to the requirement. Table 3-31 describes the parameters. Click Diagnosis to test. The test result will be displayed in the lower text box. Table 3-31...

  • Page 83: Management

    Web Configuration Guide Figure 3-53 Tracert Diagnosis Configure relevant parameters according to the requirement. Table 3-32 describes the parameters. Click Diagnosis to test. The test result will be displayed in the lower text box. Table 3-32 Parameters for Tracert Diagnosis Configuration Description Item Destination Address...
  • Page 84 HG6145F3 GPON Optical Network Terminal Product Manual Select Management in the navigation bar. Select Account Management User Account from the left link bar to open the user account management page, as shown in Figure 3-54. Figure 3-54 User Account Management Modify the password of a common user account as required.

  • Page 85: Device Management

    Web Configuration Guide 3.6.2 3.6.2 Device Management The ONT provides multiple device management functions such as restoring some of the configuration data, local upgrade, configuration backup, device reboot, FTP server, and NTP time calibration. 3.6.2.1 3.6.2.1 Restoring the Configuration Data Restore factory settings of the ONT, including user name and password for Web login, SSID and password for wireless network, etc.

  • Page 86: Configuration Backup

    HG6145F3 GPON Optical Network Terminal Product Manual Figure 3-57 Local Upgrade Click Choose file. In the dialog box that appears, select the device software version to be upgraded and click Update File to upgrade the ONT software. When the upgrade succeeds, the page will prompt for device rebooting. Click Reboot.

  • Page 87: Device Reboot

    Web Configuration Guide Figure 3-58 Configuration Backup Backup configuration file Click Download configuration file to back up the ONT configuration file into computer. Update configuration file Click Choose file. In the dialog box that appears, select the configuration file to be updated and click Update File.
  • Page 88 HG6145F3 GPON Optical Network Terminal Product Manual Caution: Save the configuration data before rebooting the device to prevent loss of the data. After the device is rebooted, wait for about two minutes before next login to the web page of the device.

  • Page 89: Log Management

    Web Configuration Guide Table 3-33 Parameters for NTP Time Calibration (Continued) Description Item Second NTP Enter the IP address of the standby NTP server. Server Select the time zone according to the location of the device. Time Zone When NTP Check Time is enabled, time will be calibrated according to the location of the device, and the local time will be displayed.
  • Page 90 HG6145F3 GPON Optical Network Terminal Product Manual Select Management in the navigation bar. Select Log Log from the left link bar to open the log information page, as shown in Figure 3-62. Figure 3-62 Version: A...

  • Page 91: Handling Common Problems

    Handling Common Problems The following introduces how to handle common problems encountered in equipment operation and service test. Power Status Indicator LED Extinguished Handle the problem according to the procedures below: Check whether the mains supply is normal. Check whether the power adapter matches the device. Check whether the power button is pressed down.

  • Page 92: Ethernet Interface Status Indicator Led Extinguished

    HG6145F3 GPON Optical Network Terminal Product Manual Check whether the local device is faulty. Ethernet Interface Status Indicator LED Extinguished Handle the problem according to the procedures below: Check whether the network cable is damaged or connected incorrectly. Check whether the color-coding scheme of the network cable is incorrect; if so, replace it with a standard CAT-5 twisted pair network cable.

  • Page 93: Failing To Access Internet Using The Lan Port

    Handling Common Problems Failing to Access Internet Using the LAN Port Handle the problem according to the procedures below: Check whether the computer is set with a fixed IP address. If yes, modify the configuration so that the computer can obtain an IP address automatically. Then retry the connection.
  • Page 94 HG6145F3 GPON Optical Network Terminal Product Manual Check whether you can hear the dial tone when you go off-hook; if no, contact the network management center to check whether the voice service work order has been delivered correctly and whether the uplink device has delivered the configuration data to the voice service port of the ONT.

  • Page 95: Standards And Protocols

    Standards and Protocols Classification Standard Number Title Gigabit-capable passive optical networks (GPON): General characteristics ITU-T G.984.1 Gigabit-capable Passive Optical Networks (GPON): Physical Media ITU-T G.984.2 Dependent (PMD) layer specification GPON Gigabit-capable Passive Optical Networks (G-PON): Transmission ITU-T G.984.3 convergence layer specification Gigabit-capable passive optical networks (G-PON): ONT management and ITU-T G.984.4 control interface specification...
  • Page 96 HG6145F3 GPON Optical Network Terminal Product Manual Classification Standard Number Title Coding of speech at 8 kbit/s using conjugate-structure algebraic-code- ITU-T G.729 excited linear prediction (CS-ACELP) G.729 based Embedded Variable bit-rate coder: An 8-32 kbit/s scalable ITU-T G.729.1 wideband coder bitstream interoperable with G.729 ITU-T G.165...
  • Page 97 Standards and Protocols Classification Standard Number Title IEEE Draft Standard for Information Technology Telecommunications and Information Exchange Between Systems Local and Metropolitan Area Networks Specific Requirements Part 11: Wireless LAN Medium Access P802.11ax Control (MAC) and Physical Layer (PHY) Specifications Amendment Enhancements for High Efficiency WLAN Network Time Protocol (Version 3) Specification, Implementation and IETF RFC 1305...

  • Page 98: Appendix A Abbreviations

    Appendix A Abbreviations Optical Network Terminal FTTH Fiber To The Home Gigabit-capable Passive Optical Network GPON Optical Distribution Network Optical Line Termination Dynamic Bandwidth Allocation Extensible Markup Language GPON Encapsulation Mode Asynchronous Transfer Mode Operation, Administration And Maintenance Forward Error Correction Time Division Multiple Access TDMA Physical Layer Operations, Administration and Maintenance...
  • Page 99 Appendix A Abbreviations Class of Service Session Initiation Protocol VoIP Voice over Internet Protocol Real-time Transport Protocol IGD_WLAN_SSID Service Set Identifier Wide Area Network Local Area Network WLAN Wireless Local Area Networks Maximum Transmission Unit PPPoE Point to Point Protocol over Ethernet Dual Tone Multi Frequency DTMF Virtual Private Network...
  • Page 100 HG6145F3 GPON Optical Network Terminal Product Manual IP Multimedia Subsystem Internet Protocol Link Aggregation Control Protocol LACP Local Area Network Multi-Dwelling Unit Media Gateway Controller Media Gateway Control Protocol MGCP Multicast Listener Discover MoIP Modem over IP MTBF Mean Time Between Failure...
  • Page 101 Appendix A Abbreviations Synchronous Transport Module Straight-Through Processing Secure Shell Transmission Control Protocol Time Division Multiplex Trunk Gateway Time of Day Type of Service User Datagram Protocol User-Network Interface Video Distribution Network Very High Speed Digital Subscriber Line VDSL Wavelength Division Multiplexing Version: A...

Table of Contents