PMML
Ideal to remotely control electric shutters, blinds, awnings, home cinema screens, lighting, appliances, interior
and exterior lighting, motors, pumps......
On/O and Start/Stop functions. Replaces the original on/o switch.
Ideal für Steuerung von Lamellenjalousien / Rolläden, Vordachmarkisen, Heimkino-Bildschirmen, Beleuchtung,
diversen weiteren Geräten, Innen-und Außenbeleuchtung, Motoren, Pumpen, usw.
Ein- / Aus-Funktionen und Start- / Stoppfunktion: Ersetzt den originalen Ein-/Ausschalter.
Ideaal voor het op afstand besturen van elektrische zonweringen, projectieschermen, verlichting, apparaten,
binnen en buitenverlichting, motoren, pompen...
Aan/Uit functies en Start/Stop functies. Vervangt de originele aan/uit knop.
Perfekt för styrning av elektroniskt kontrollerade fönsterjalusier, persienner, markiser, hemmabio- lmdukar,
belysning och övrig utrustning, belysning både inomhus och utomhus, för motorer, pumpar...
På/Av funktioner och Start/Stopp funktioner. Ersätter den ursprungliga på/av knappen.
Idéal pour commande de volets roulants/battants, store banne, écran Home Cinéma, éclairage, appareil,
d'éclairage intérieur comme extérieur, un moteur, une pompe ... Fonctions Marche/Arrêt et Fonctions
Marche/Arrêt. Remplace l'interrupteur d'origine.
EIdeal para controlar persianas enrollables, toldos, pantallas de cine en casa, iluminación, aparatos, iluminación
interior y exterior con control remoto, motores, bombas, etc.
Funciones de encendido/apagado y Funciones de Arranque/Detención. Sustituye al interruptor de
encendido/apagado original.
Ideal para o controlo de persianas/asas rolantes,ecrã de cinema familiar, iluminação, aparelhos, iluminação
interna e externa, motores, bomba ...
Funções On/O e Funções Start/O . Substitui o interruptor On/O original.
Ideale per il controllo di tapparelle/persiane, tendoni, schermi per Home Cinema, illuminazione, apparecchi,
l'illuminazione interna ed esterna, motori, pompe...
Funzioni acceso/spento ed Funzioni Start/Stop. Sostituisce l'interruttore originale on/o .
TRANSMITTER
& RECEIVER
Remote Controlled Appliance Kit
TECHNICAL
CHARACTERISTICS PMML
INSTALLATION :
Both: 65mm ø in-wall box, min depth
40mm. The modules can be combined
with all other products from the ebode
range.
RMML: Wire up the micro-receiver
between the mains (Live + Neutral)
and the light, or behind a wall socket
to remotely control a stand up lamp.
EMML: Wire up the micro module
EMML to the mechanical wall switch
and insert the couple within the wall
box.
RF range up to 100 meters
FUNCTIONS:
Wireless Control: On/O and Start/Stop
APPLICATIONS:
RMML: Installation or replacement of
all incandescent, halogen, low voltage
spots up to 500 watts, energy saving
bulbs ( uorescent) and LED up to 300
watts. Appliances up to 8A when
inserted behind a wall socket.
EMML: For control of electric shutters,
blinds, awings, home cinema screens,
lighting, and appliances.
POWER SUPPLY
RMML: 230V ~ 50 Hz
EMML: 1 CR2032 Li 3V battery
More from ebode
EM
RMV
RPT
TPC
www.ebodeelectronics.eu