Ryobi IR003 Operator's Manual

OPERATOR'S
MANUAL
NON-CONTACT INFRARED
THERMOMETER
IR003
WARNING!
R E A D A N D U N D E R S T A N D
INSTRUCTIONS. Failure to follow all instructions
listed below and on the machine may result in
electric shock, fire, and/or serious personal injury.
WARNING!
Use of controls or adjustments or performance
other than those specified herein may result in
hazardous radiaition exposure.
Avoid direct eye exposure when using the laser
„
and do not project the laser beam directly into
the eyes of others. Serious eye injury could
result.
Do not operate the laser around children or
„
allow children to operate the product. Serious
eye injury could result.
Do not use for medical evaluations or to
„
measure body temperature. This product is
meant for household use only.
Never aim the beam at a person or object other
„
than the target surface.
Do not use this product as a precision
„
thermometer.
Avoid exposing the unit to shock, continuous
„
vibration, or extreme hot or cold temperatures.
Damage to the product and/or serious injury to
the user could result.
Save these instructions. Refer to them frequently
„
and use them to instruct others who may use this
product. If you loan someone this product, loan
them these instructions also to prevent misuse of
the product and possible injury.
Fig. 1
A
B
D
C
E
A - Laser beam (faisceau laser, rayo láser)
B - Measuring beam (faisceau de mesure, rayo
medidor)
C - Trigger (gâchette, gatillo)
D - LCD display (afficheur acl, pantalla de cristal
líquido)
E - Battery compartment (compartiment de la batterie,
compartimiento de la batería)
A L L
PRODUCT SPECIFICATIONS
Temperature Range:
Laser Certifications:
Ambient Operation
Temperature Range:
APPLICATIONS
Detects hot/cold spots in door and window seals
„
to help pinpoint draft areas or leakage of warm
or cool air
Check the temperature of air vents
„
„ Check the exterior/interior surfaces of household
items and appliances
„ Automotive applications
INSTALLING THE BATTERY
See Figure 2.
A 9V battery (included) must be installed before using
the thermometer.
To install the battery:
„ Slide the battery cover down, then up and remove
it from the handle of the thermometer.
„ Attach the battery terminals to their connectors
on the thermometer.
„ Slide the switch inside the handle to select
Fahrenheit or Celsius temperature readings.
Close the battery compartment by sliding the
„
cover into place until it snaps closed.
TAKING TEMPERATURE READINGS
See Figure 3.
For the most accurate readings, follow these hints:
Fig. 2
C
A - C°/F°
selector de grado celsius o farenheit)
B - 9V battery (batterie de 9 v, batería de 9 v)
C - Battery cover (couvercle du compartiment de la
batterie, cubierta de la batería)
D - Battery compartment (compartiment de la batterie,
compartimiento de la batería)
TTI CONSUMER POWER TOOLS, INC. P.O. Box 1288, Anderson, SC 29622 • Phone 1-800-525-2579
États-Unis, Téléphone 1-800-525-2579 • USA, Teléfono 1-800-525-2579 www.ryobitools.com
-4˚F to 1022˚F (-20˚C to 550˚C)
Class II<1mW, 630-670 nm
32˚F to 122˚F (0˚C to 50˚C)
B
D
A
selector (sélecteur celsius°/farenheit°,
NOTE: Temperature readings can only be measured
on a target surface.
„ Place the unit less than two (2) feet from the item
you wish to read.
„ Accuracy at ambient (24ºC ± 1ºC): +/- 3°C ( +/-
5.4°F) or +/-3 % whichever is greater.
„ Readings at distances greater than two (2)
feet may be less accurate due to external
light sources, surrounding air temperature and
reading of larger surface areas not intended to
be measured.
„ Cleaner surfaces will give more accurate
readings.
„ Allow 10-15 minutes to adjust to extreme
temperature changes when testing an item or
area out of the operating range 32˚F - 122˚F
(0˚C - 50˚C).
SPOT READINGS
The infrared thermometer has an 8:1 distance-to-ratio
with a +/- 3°C ( +/-5.4°F) or +/-3 % whichever is greater.
NOTE: The laser beam will remain on as long as the
trigger is depressed.
Aim at the target item or surface.
„
Pull and release the trigger once.
„
„ The target temperature reading is displayed on
the screen for approximately 7 seconds after the
trigger is pulled.
CONTINUOUS READINGS
Aim at one location.
„
Pull and hold the trigger.
„
„ Move the laser beam over another location.
„ The temperature will be displayed and will change
when the target object changes.
The maximum temperature read will also be
„
displayed.
The target temperature reading is displayed on
„
the screen for approximately seven (7) seconds
after the trigger is released.
MAINTENANCE
Do not immerse the product in water. Clean only the
exterior using a damp cloth.
To ensure accurate readings, the battery should be re-
placed when the battery indicator shows a low battery.
To receive a replacement product, you must present
proof of purchase and return all original equipment
packaged with the original product. The replacement
product will be covered by the limited warranty for the
balance of the two year period from the date of the
original purchase.
Fig. 3
A
E
C
B
A - Hold indicator (indicateur de maintien, indicador de
retención)
B - Battery indicator (indicateur de batterie, indicador
de batería)
C - Maximum temperature (température maximum,
temperatura máxima)
D - Laser indicator (indicateur de laser, indicador de
láser)
E - Current temperature (température
temperatura actual)
F - C/F (C/F, C/F)
D
F
actuelle,
999000367
12-20-23 (REV:01)